Loading

Flat Panel

Within the flat panel section, you will be able to find a non-exhaustive list of available detectors for digital radiogtaphy.

Flat panels are a combination of electronics and silicon, providing direct conversion support to display radiographic images instead of using the traditional film technique. This helps to reduce the exposure time but also gives an extended range of thicknesses using the same energy range.

If you don't find the right specification within our catalogue, do not hesitate to contact us as we can surely find the right equipment for your requirements.

Baltoscope

Mobi-X 12-75

  • Product description
  • Key features
  • Key advantages

The Mobi-X is a portable flat panel detector. Thanks to its battery and Wi-Fi interface, a digital inspection can now be done anywhere. Moreover the Mobi-X is very light, robust and ergonomic which makes it easy to be used in harsh environment and conditions. Equipped with an internal memory, the Mobi-X can to store images in order to allow the operator to unload them later.

The Mobi-X is an X-ray detector with a 16-bit conversion for 75 μm² available in 3 different sizes. The acquisition software of the Inspection Suite comes with the equipment providing a user-friendly interface for the acquisition of images. The optional Image Processing Software (IPS012) makes it a complete solution.

Flat panels are a combination of electronics and silicon, providing direct conversion support to display radiographic images instead of using the traditional film technique. This helps to reduce the exposure time but also gives an extended range of thicknesses using the same energy range.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Pelican case available for transport
  • Rechargeable battery
  • Available in Csl or Gadox conversion depending on the model
  • Aluminium frame with Carbon-fiber window
  • Shielding up to 450 kV
  • IPS012 Image Processing Software available as an option
  • 25 x 32 cm images
  • Detachable handle
  • Wi-Fi & Gigabit Ethernet (GbE) interface
  • Thin bezels of min. 8.5mm
  • IP67 protection
  • Robust & lightweight design
SpecificationsUnitsMobi-X 12-75
Dimensionsmm257 (L) x 208 (l) x 28 (h)
WeightKg2
Receptor typeTFT with photodiode
Conversion screenCsl or Gadox
Pixel matrix2304 x 3072
A/D ConversionBits16
Active areamm172,8 x 230,4
Pixel pitchµm75
Image frequencyFps1 (75x75)
InterfaceWiFi or GbE
WiFi802.11n WiFi Std @ 2,4GHz, 5 GHz
Image transfer timeWiFi: 3000ms / GbE: 1500ms
Power supplyRechargeable battery 11,1V*

Baltoscope

Mobi-X 16/23/25-100

  • Product description
  • Key features
  • Key advantages

The Mobi-X is a portable flat panel detector. Thanks to its battery and Wi-Fi interface, a digital inspection can now be done anywhere. Moreover the Mobi-X is very light, robust and ergonomic which makes it easy to be used in harsh environment and conditions. Equipped with an internal memory, the Mobi-X can to store images in order to allow the operator to unload them later.

The Mobi-X is an X-ray detector with a 16-bit conversion for 100 μm² available in 3 different sizes. The acquisition software of the Inspection Suite comes with the equipment providing a user-friendly interface for the acquisition of images. The optional Image Processing Software (IPS012) makes it a complete solution.

Flat panels are a combination of electronics and silicon, providing direct conversion support to display radiographic images instead of using the traditional film technique. This helps to reduce the exposure time but also gives an extended range of thicknesses using the same energy range.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Pelican case available for transport
  • Rechargeable battery
  • Available in Csl or Gadox conversion depending on the model
  • Aluminium frame with Carbon-fiber window
  • Shielding up to 160 kV
  • IPS012 Image Processing Software available as an option
  • 3 versions/dimensions available of Mob-X
  • From 25 x 30 cm to 43 x 43 cm images
  • Automatic Exposure Detection
  • Wi-Fi & Gigabit Ethernet (GbE) interface
  • Docking connector or GbE, power & sync
  • On-board pixel corrections & storage
  • Dynamic mode
  • Fast preview image
  • Robust & lightweight design
SpecificationsUnitsMobi-X 16-100Mobi-X 23-100Mobi-X 25-100
Dimensionsmm282 (L) x 332 (l) x 15,5 (h)384 (L) x 460 (l) x 15 (h)460 (L) x 460 (l) x 15 (h)
WeightKg1,83,84,1
HousingAl frame/Carbon fi ber windowCarbon fi ber front & backAl frame/Carbon fi ber window
Receptor typeAmorphous siliconAmorphous siliconAmorphous silicon
Conversion screenCslCslCsl or Gadox
Pixel matrix3004 x 25083288 x 35244318 x 4320
A/D ConversionBits161616
Active areamm298 x 248350 x 426432 x 432
Pixel pitchµm100100100
Image frequencyFps10 fps at 200μm resolution8 fps at 200μm resolution6 fps at 200μm resolution
InterfaceWiFi or GbEWiFi or GbEWiFi or GbE
WiFi802.11n WiFi Std @ 5 GHz802.11n WiFi Std @ 5 GHz802.11n WiFi Std @ 5 GHz
Image transfer timeWiFi: 2000ms / GbE: 300msWiFi: 3000ms / GbE: 500msWiFi: 3600ms / GbE: 600ms
On board memory1GB DDR3, 8GB SDHC Card1GB DDR3, 8GB SDHC Card1GB DDR3, 8GB SDHC Card
Power supplyRechargeable battery 11,1V*Rechargeable battery 11,1V*Rechargeable battery 11,1V*

*(Delivered with charger 110 - 240 V)

Baltoscope

FPDigit 7-127

  • Product description
  • Key features
  • Key advantages

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries.

Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in DRZplus or CsI
  • Aluminium frame
  • Standard shielding of 160 kV
  • IPS012 Image Processing Software available as an option
  • Pixel area of 13 x 13 cm
  • Gigabit Ethernet (GbE) interface
  • Available in 16 bits
  • Amorphous silicon receptor
  • Progressive scan method
SpecificationsUnitsFPDigit 7-127
Dimensionscm5,58 (w) x 18,30 (l) x 17,63 (h)
Weightkg1,71
HousingAluminium
Receptor TypeAmorphous silicon
Conversion screenDRZ plus, Direct Deposit CsI
Pixel matrix - Total1024 x 1024 (1 x 1)
Pixel pitchµm²127
Spatial resolutionlp/mm3,94
A/D Conversionbits16
Energy range (standard)kVp40 - 160
Scan methodProgressive
MTF> 48% @ 1 lp/mm (1x1), CsI screen
Fill factor%57
Standard shieldingShielded for 160 kV X-ray radiation
System InterfaceGigabit Ethernet
Power supply100 - 240 VAC / 47 - 63 Hz
Power DissipationV15 (typical)
Operating temperature°C10° to 45°
Storage temperature°C-20° to 70°
Humidity (Operating/storage)%10 to 90

Baltoscope

FPDigit 8-127

  • Product description
  • Key features
  • Key advantages

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries.

Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in DRZplus or Direct Deposit CsI
  • Aluminium frame
  • Standard shielding of 225 kV
  • IPS012 Image Processing Software available as an option
  • Pixel area of 15 x 15 cm
  • Gigabit Ethernet (GbE) interface
  • Available in 16 bits
  • Amorphous silicon receptor
  • Progressive scan method
SpecificationsUnitsFPDigit 8-127
Dimensionscm5,48 (w) x 18,30 (l) x 15,72 (h)
Weightkg1,99
HousingAluminium
Receptor TypeAmorphous silicon
Conversion screenDirect Deposit CsI, DRZplus
Pixel matrix - Total1152 x 1152 (1 x 1) / 576 x 576 (2 x 2)
Pixel pitchµm²127
Spatial resolutionlp/mm3,94
A/D Conversionbits16
Energy range (standard)kVp40 - 225
Scan methodProgressive
MTF> 48% @ 1 lp/mm (1x1), Csl screen
Fill factor57 %
Standard shieldingShielded for 225 kV X-ray radiation
System InterfaceGigabit Ethernet
Power supply100 - 240 VAC / 47 - 63 Hz
Power DissipationV15 (typical)
Operating temperature°C10° to 35°
Storage temperature°C-20° to 70°
Humidity (Operating/storage)%10 to 90

Baltoscope

FPDigit 11-200

  • Product description
  • Key features
  • Key advantages

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries.

Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in DRZplus or CsI
  • Aluminium frame
  • Standard shielding of 160 kV
  • IPS012 Image Processing Software available as an option
  • Pixel area of 20,5 x 20,5 cm
  • Gigabit Ethernet (GbE) interface
  • Available in 14 or 16 bits
  • Amorphous silicon receptor
  • Progressive scan method
SpecificationsUnitsFPDigit 11-200
Dimensionscm29,5 (w) x 36,0 (l) x 2,2 (h)
Weightkg3,7
HousingAluminium
Receptor TypeAmorphous silicon
Conversion screenDRZplus (CsI available in the options)
Pixel matrixpitch1024 x 1024 @ 200 μm²
Spatial resolutionlp/cm25
A/D Conversionbits14 or 16
Amplifi ers8 x 128 channel custom low noise ASICs with 2 (AO) or 6 (AP) user selectable gain settings
Dynamic rangedB> 78 dB (14bits) / > 88 dB (16bits)
Energy range (standard)kVp20 - 15000
Standard shieldingkV160
Scan methodProgressive
DQE75% (0 cy/mm), 58% (1cy/mm), 37% (2cy/mm) for RQA5 with Csl
MTF67% (1cy/mm), 33% (2cy/mm) with Csl
Lag< 8% 1st frame
System InterfaceGigabit Ethernet
Operating temperature°C10° to 40°
Storing temperature°C-10° to 50°
Humidity%10 - 90% RH (non condensing)
Supply100 - 240 VAC, 50 - 60 Hz
DissipationW25
IP codeIP65

Baltoscope

FPDigit 13-127

  • Product description
  • Key features
  • Key advantages

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries.

Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in DRZplus or Direct deposit CsI
  • Aluminium frame
  • Standard shielding of 225 kV
  • IPS012 Image Processing Software available as an option
  • Pixel area of 20 x 25 cm
  • Gigabit Ethernet (GbE) interface
  • Available in 16 bits
  • Amorphous silicon receptor
  • Progressive scan method
SpecificationsUnitsFPDigit 13-127
Dimensionscm26,6 (w) x 22,3 (l) x 3,32 (h)
Weightkg4,3
HousingAluminium
Receptor TypeAmorphous silicon
Conversion screenDRZplus or CsI
Pixel matrix - Total1536 (h) x 1920 (v) @ 127 μm²
Pixel pitchμm²127
Spatial resolutionlp/mm3,94
A/D Conversionbits16
Energy range (standard)kVp40 - 225
Scan methodProgressive
MTF> 48% @ 1 lp/mm (1x1), CsI screen
Fill factor%57
Standard shieldingShielded for 225 kV X-ray
System InterfaceGigabit Ethernet
Power supply100 - 240 VAC / 47 - 63 Hz
Power DissipationV15 (typical)
Operating temperature°C10° to 35°
Storing temperature°C-20° to 70°
Humidity (Operating/storage)%10 to 90

Baltoscope

FPDigit 16-139

  • Product description
  • Key features
  • Key advantages

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries.

Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in DRZplus or Direct Deposit CsI
  • Aluminium frame
  • Standard shielding of 160 kV
  • IPS012 Image Processing Software available as an option
  • Pixel area of 24,9 x 30,2 cm
  • Gigabit Ethernet (GbE) interface
  • Available in 16 bits
  • Amorphous silicon receptor
  • Progressive scan method
SpecificationsUnitsFPDigit 16-139
Dimensionsmm337 (w) x 279 (l) x 49,35 (h)
Weightkg4,1
HousingAluminium
Receptor TypeAmorphous silicon
Conversion screenDirect Deposit CsI, DRZplus
Pixel matrix - Total1792 x 2176 (1 x 1)
Pixel pitchμm²139
Spatial resolutionlp/mm3,60
A/D Conversionbits16
Energy range (standard)kV40 - 160
Scan methodProgressive
MTF> 48% @ 1 lp/mm (1x1), CSl screen
Fill factor%57 %
Standard shieldingShielded for 160 kV X-ray radiation
System InterfaceGigabit Ethernet
Power supply100 - 240 VAC / 47 - 63 Hz
Power DissipationV15 (typical)
Operating temperature°C10° to 35°
Storing temperature°C-20° to 70°
Humidity (Operating/storage)%10 to 90

Baltoscope

FPDigit 16-139HE

  • Product description
  • Key features
  • Key advantages

The FPDigit 16-139HE is high dynamic range x-ray detector. With a 16 Bit conversion and 139 μm² pixel pitch, this fl at panel will offer a frame rates up to 30 frames per second (2 x 2). The acqusition of image will be made by Gigabit Ethernet communication. The FPDigit has internal shielding up to 225kV; Electronics being outside of the detector active area, an additional external shielding of the electronics can be added for use above 225kV.

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming effi cient and affordably priced to be used in NDT Industries.


Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in DRZplus or Direct Deposit CsI
  • Aluminium frame
  • Standard shielding of 225 kV
  • IPS012 Image Processing Software available as an option
  • Pixel area of 24,9 x 30,2 cm
  • Gigabit Ethernet (GbE) interface
  • Available in 16 bits
  • Amorphous silicon receptor
  • Progressive scan method
SpecificationsUnitsFPDigit 16-139
Dimensionsmm337 (w) x 279 (l) x 49,35 (h)
Weightkg4,1
HousingAluminium
Receptor TypeAmorphous silicon
Conversion screenDirect Deposit CsI, DRZplus
Pixel matrix - Total1792 x 2176 (1 x 1)
Pixel pitchμm²139
Spatial resolutionlp/mm3,60
A/D Conversionbits16
Energy range (standard)kV40 - 160
Scan methodProgressive
MTF> 48% @ 1 lp/mm (1x1), CSl screen
Fill factor%57 %
Standard shieldingShielded for 225 kV X-ray radiation
System InterfaceGigabit Ethernet
Power supply100 - 240 VAC / 47 - 63 Hz
Power DissipationV15 (typical)
Operating temperature°C10° to 35°
Storing temperature°C-20° to 70°
Humidity (Operating/storage)%10 to 90

Baltoscope

FPDigit 16-124

  • Product description
  • Key features
  • Key advantages

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries.

Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in CsI or Gadox
  • Shielding up to 450 kV
  • IPS012 Image Processing Software available as an option
  • 25 x 32 cm images
  • Gigabit Ethernet (GbE) interface (2 ports)
  • High image resolution of 4.0 lp/mm
  • Reliable image transfer using 8GB internal memory
  • Automatic backup of images in the detector memory
SpecificationsUnitsFPDigit 16-124
Dimensionsmm343 (L) x 285 (l) x 45 (h)
Receptor typeTFT with photodiode
Conversion screenCsl or Gadox
Pixel matrix2048 x 2560
A/D ConversionBits16
Active areamm253,94 x 317,44
Pixel pitchµm124
Image frequency (1 x 1)Fps9 / 22
Image frequency (2 x 2)Fps18 / 44
InterfaceGbE (2 ports)
Image transfer timeMax. 2Gbps

Baltoscope

FPDigit 22-100

  • Product description
  • Key features
  • Key advantages

The FPDigit 22-100 is high dynamic range x-ray detector. With its 16 inch, more than 16 millions pixels and 100 µm pixel pitch, this flat panel will offer a dynamic range over 84dB with a frame rates up to 15 frames per second. The acqusition of image will be made by optical data communication.

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries.

Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in DRZplus or Csl
  • Fiber-optical interface
  • Aluminium frame
  • Standard shielding of 160 kV
  • IPS012 Image Processing Software available as an option
  • Pixel area of 41 x 41 cm
  • Fiber-optical interface
  • Available in 16 bits
  • Amorphous silicon receptor
  • Different read-our mode to increase fps
SpecificationsUnitsFPDigit 22-100
Dimensionscm67,2 x 59,9 x 44
Weightkg25
HousingAluminium
Receptor TypeAmorphous silicon
Conversion screenDRZplus (Csl available in the options)
Pixel matrixpitch4096 x 4096 @ 100 μm pixel pitch
Spatial resolutionlp/cm50
A/D Conversionbits16
AmplifiersLow noise ASICs with 6 user selectable gain settings
Dynamic rangedB> 84
Energy range (standard)kVp40 - 15000
Lag< 8% 1st frame
System InterfaceFiber-optical
Operating temperature°C10° to 35°
Storage temperature°C-10° to 50°
Humidity%30 - 70% RH (non condensing)
Supply100 - 240 VAC, 50 - 60 Hz (FPDigit22-200 Power supply 215 W)
DissipationW90

Baltoscope

FPDigit 22-200

  • Product description
  • Key features
  • Key advantages

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries.

Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

 

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in DRZplus or CsI
  • Aluminium frame
  • Standard shielding of 160 kV
  • IPS012 Image Processing Software available as an option
  • Pixel area of 40 x 40 cm
  • Gigabit Ethernet (GbE) interface
  • Available in 14 or 16 bits
  • Amorphous silicon receptor
  • Progressive scan method
SpecificationsUnitsFPDigit 22-200
Dimensionscm50,0 (w) x 56,0 (l) x 2,2 (h)
Weightkg8,8
HousingAluminium
Receptor TypeAmorphous silicon
Conversion screenDRZplus (Csl available in the options)
Pixel matrixpitch2048 x 2048 @ 200 μm²
Spatial resolutionlp/cm25
A/D Conversionbits14 or 16
Amplifiers16 x 128 channel custom low noise ASICs with 2 (AO) or 6 (AP)
Amplifiersuser selectable gain settings
Dynamic rangedB> 74 dB (14bits) / > 85 dB (16bits)
Energy range (standard)kVp20 - 15000
Scan methodProgressive
DQE67% (0 cy/mm), 53% (1cy/mm), 36% (2cy/mm) for RQA5 with Csl
MTF63% (1cy/mm), 31% (2cy/mm) with Csl
Lag< 6% 1st frame
System InterfaceGigabit Ethernet
Operating temperature°C10° to 40°
Storage temperature°C-10° to 50°
Humidity%10 - 90% RH (non condensing)
Supply100 - 240 VAC, 50 - 60 Hz (FPDigit22-200 Power supply 40W)
DissipationW32

Baltoscope

FPDigit 24-139

  • Product description
  • Key features
  • Key advantages

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries.

Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in DRZplus
  • Standard shielding of 160 kV
  • IPS012 Image Processing Software available as an option
  • Pixel area of 43 x 43 cm
  • Gigabit Ethernet (GbE) interface
  • Available in 16 bits
  • Amorphous silicon receptor
  • Progressive scan method
SpecificationsUnitsFPDigit 24-139
Dimensionscm61,8 (w) x 52,8 (l) x 24,4 (h)
Receptor TypeAmorphous silicon
Conversion screenDRZplus
Pixel matrix - Total3072 x 3072
Pixel pitchμm²139
A/D Conversionbits16
Energy range (standard)kV to MV20kV to 16 MV (With appropriate shielding)
System InterfaceGigabit Ethernet
Power supplyDC 24 V, 1.7 A
Operating temperature°C10° to 35°
Humidity (Operating/storage)%10 to 90
WeightKg14,6

Baltoscope

FPDigit 24-140

  • Product description
  • Key features
  • Key advantages

Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries.

Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an extended range of thicknesses with the same use of energy.

  • Delivered with Balteau NDT Acquisition software for image acquisition
  • Available in CsI or Gadox
  • Shielding up to 450 kV
  • IPS012 Image Processing Software available as an option
  • Pixel area of 43 x 43 cm
  • Gigabit Ethernet (GbE) interface (2 port)
  • Available in 16 bits
  • TFT with photodiode
SpecificationsUnitsFPDigit 24-140
Dimensionscm47,1 (w) x 47,1 (l) x 3,5 (h)
Receptor TypeTFT with photodiode
Conversion screenCsI or Gadox
Pixel matrix - Total3072 x 3072
Pixel pitchμm²140
A/D Conversionbits16
Energy range (standard)kVp40 - 450
System InterfaceGigabit Ethernet
Power supplyDC 24 V, 1.7 A
Operating temperature°C10° to 35°
Humidity (Operating/storage)%30 to 85 (Non-condensing)