Loading

LLX Series

The LLX series is an air cooled, high frequency constant potential generator.
It is dedicated to high precision applications like aerospace where specific requirements and speed of inspection are needed. These units are CP type and are controlled by a DC1 or Hand-XD and can be used in combination with digital detectors.

Baltospot

LLX110-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX110-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for field inspection especially where quality requirements and speed of inspection are essentials.

The LLX110-DA has been engineered especially to answer inspection of light components in places where x-ray exposures are limited.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital applications
  • Constant potential high frequency generator
  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. EPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Art, museum
  • Aeronautics, composites &plastics
  • Digital applications (flat panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX110-DA-0LLX110-DA-1
High voltage rangekV5 - 1005 - 110
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600600
Beam angle°60 x 4060 x 40
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (EN12543)mm1,03,0
Steel penetration at max (*)mm1215
Max recommended temp.°C50°50°
Temperature switch°C70°70°
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duty cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Kg1616
TubeheadMetal-ceramicMetal-ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

LLX160-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX160-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for fi eld inspection especially where quality requirements and speed of inspection are essentials. The specific shape given to the head of the generator makes it easier to use on field where space is always restricted for instance in aerospace applications.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital applications
  • Constant potential high frequency generator
  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. XPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Aeronautics, composites & plastics
  • Building sites
  • Digital applications (flat panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX160-DA-0LLX160-DA-1
High voltage rangekV5 - 1605 - 160
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600900
Beam angle60° x 40°60° x 40°
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (IEC336)mm1,03,0
Steel penetration at max (*)mm50°50°
Max recommended temp.°C70°70°
Temperature switch°C70°70°
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duat cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Kg1616
TubeheadMetal-ceramicMetal-ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD = 700mm / Film Carestream Industrex AA400/D=2,0/t=10min.

Baltospot

LLX200-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX200-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for fi eld inspection especially where quality requirements and speed of inspection are essentials.

The specific shape given to the head of the generator makes it easier to use on field where space is always restricted for instance in aerospace applications.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital application

  • Constant potential high frequency generator

  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. XPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Aeronautics, composites & plastics
  • Building sites
  • Digital applications (fl at panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX200-DA-0LLX200-DA-1
High voltage rangekV5 - 2005 - 200
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600900
Beam angle°60 x 4060 x 40
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (EN12543)mm1,03,0
Steel penetration at max. (*)mm4244
Max recommended temp.°C5050
Temperature switch°C7070
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duty cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Kg1818
TubeheadMetal-CeramicMetal-Ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

LLX200-PA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

Completing its range of very lightweight and powerful portable X-ray generators, Balteau NDT is adding the panoramic version of its well known LLX Series.

Air cooled and actively powerful with the smallest carbon footprint of its generation, LLX200-PA will satisfy your most complex applications and expectations.

Used in Aerospace business mostly, this compact unit can also be used in piping industry, Oil & Gas, tank, etc.

The innovative cradle will help you to not only transport this unit easily but also to adopt any position as required by your daily jobs.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output
  • Constant potential high frequency generator
  • Current up to 12mA
  • Panoramic metal-ceramic tubehead
  • Factory setted beam homogeneity
  • Easy adaptation to crawler
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Serial link through RS232
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • Works on power generator
  • CANON mil. metallic connectors
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Tanks, reservoirs & pressure vessels
  • Small enclosure x-ray
  • Aeronautics
  • Oil & Gas
  • Conventional films
SpecificationsUnitsLLX200-PA-0
High voltage rangekV5 - 200
Tube current rangemA0,5 - 12
Maximum anode power dissipationWatt600
Beam angle°360 x 40
Focal spot size (EN12543)mm0,4 x 0,4
Steel penetration at max (*)mm35
Max recommended temp.°C50°
Temperature switch°C70°
Inherent fi ltrationmm0,4 Fe/Ni/Co
Anode cooling typeAir
Duty cycle%100
MainsV180 - 260
Weight (without rings)Kg18
TubeheadMetal-Ceramic
Control unitDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

LLX225-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX225-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator from the LLX Series that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for fi eld inspection especially where quality requirements and speed of inspection are essentials. The specific shape given to the head of the generator makes it easier to use on field where space is always restricted for instance in aerospace applications.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital application
  • Constant potential high frequency generator
  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. XPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Aeronautics, composites & plastics
  • Building sites
  • Digital applications (fl at panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX225-DA-0LLX225-DA-1
High voltage rangekV5 - 2255 - 225
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600900
Beam angle60° x 40°60° x 40°
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (EN12543)mm1,03,0
Steel penetration at max (*)mm4448
Max recommended temp.°C50°50°
Temperature switch°C70°70°
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duty cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Metal-CeramicMetal-Ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

Hand-XD

  • Product description
  • Characteristics
  • Key advantages

The Hand-XD® is a revolutionary wireless remote control which can operate a generator remotely from up to 100 m in open fields. The Hand-XD offers the majority of the same features but for controlling the Baltospot Portable Constant potential series.

The purpose of this is certainly to gain freedom of moves in cluttered environment like shipyards or places where cables are at risk or never long enough because of mandatory twists and turns around existing infrastructures.

Having the control at your fingertips at all time including exposure is also of great advantage in terms of security as you can interrupt exposure at anytime if your surveyed area is not cleared anymore. The built in Dosimeter completes the safety oriented features of the unit by providing the operator a reliable and convenient monitoring of exposure at the very place where he or she stands.

The Hand-XD Power connected to the generator has specifically been designed to cope with harsh environment and bad power supplies.

  • Wireless remote control
  • Drives the pulsed generators
  • Automatic recognition system
  • Automatic preheating
  • Controlled by microprocessor
  • Works with up to 1500W generators
  • Parameters and last exposures held into
    memory
  • Several languages available
  • User friendly 
  • 900 g. wireless remote control
  • Integrated GM detector
  • RS232 (option)
  • Can be used in direct mode
  • Compact & robust industrial design
  • Designed for a harsh environment
  • Stable and constant output even with bad
    power supply
  • Low power requirement
  • Ergonomic keypad and numpad
  • 4 lines display : clear indications
  • Safety oriented: X-ray start with 2 buttons
  • CANON mil. Metallic connectors
SpecificationsUnitsHand-XD
Mains supply ACV170 to 260
FrequencyHz45 to 66
Duty cycle%100
Operating temperature°C-10 to 50
ConnectorsMetallic military type. Independent earth screw
CasingAluminium, rough construction with protective handles and metallic cover
kV min stepkV1
mA min stepmA0,1
Time min steps1 up to 99 min 59 s
Keypad24 keys embossed surface, anti scratch long life surface treatment
Automatic preheatingYes (90 sec. minimum)
Memories100 last exposure, 100 memories
Display4 lines, crystal clear, green back lighting, adjustable contrast
Warning lights and safety device3 steps X-ray ON key, lockable emergency stop switch (CE)
Warning lights and safety device3 positions key switch, Buzzer, Alphanumeric messages and LED
BatteryInternal accumulator (2,5A) - 8 hours charge capacity
Weight9,5 kg + 0,9 kg (remote control)

Baltospot

DC1

  • Product description
  • Characteristics
  • Key advantages

The DC1 control unit is derived from our well known CF2000 control unit and offers the majority of the same features but for controlling the BALTOSPOT Portable Constant potential series.

The unit can be distinguished from others by its two red handles and its slightly smaller size. Because power availability on sites is not that often easy to obtain, the DC1 unit uses the minimum power as possible. It also adapts to the different power supplies or variations without influencing the dose output or your image quality.

As always, Balteau is safety oriented and nothing has been left aside in that field. The waterproof ergonomic keypad and the large robust handles attached on the side are making it ideal for on site jobs as well as desktop uses. The 4 lines backlit clear display is giving at all time the necessary indications to the users about the status of operations. A convenient bright yellow cover is also protecting your unit when not in use.

  • Drives the constant potential generators
  • Automatic recognition system
  • Automatic preheating
  • Controlled by microprocessor
  • Works with up to 1000W generators
  • Parameters and last exposures held into
    memory
  • Several languages available
  • User friendly 
  • Compact & robust industrial design
  • Designed for a harsh environment
  • Stable and constant output even with bad
    power supply
  • Low power requirement
  • Ergonomic keypad and numpad
  • 4 lines display : clear indications
  • Safety oriented: X-ray start with 2 buttons
  • Lightweight cables
  • CANON mil. Metallic connectors
  • RS232 (option)
  •  
SpecificationsUnitsDC1
Mains supply ACV170 to 260
FrequencyHz45 to 66
Duty cycle%100
Operating temperature°C-10 to 50
ConnectorsMetallic military type. Independent earth screw
CasingAluminium, rough construction with protective handles and metallic cover
kV min stepkV1
mA min stepmA0,1
Time min steps1 up to 99 min 59 s
Keypad24 keys embossed surface, anti scratch long life surface treatment
Automatic preheatingYes (90 sec. minimum)
Memories100 last exposure, 100 memories
Display4 lines, crystal clear, green back lighting, adjustable contrast
Warning lights and safety device3 steps X-ray ON key, lockable emergency stop switch (CE)
Warning lights and safety device3 positions key switch, Buzzer, Alphanumeric messages and LED
Weight9,2 kg