Loading

LLX Series

The LLX series is an air cooled, high frequency constant potential generator.
It is dedicated to high precision applications like aerospace where specific requirements and speed of inspection are needed. These units are CP type and are controlled by a DC1 or Hand-XD and can be used in combination with digital detectors.

Baltospot

LLX110-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX110-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for field inspection especially where quality requirements and speed of inspection are essentials.

The LLX110-DA has been engineered especially to answer inspection of light components in places where x-ray exposures are limited.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital applications
  • Constant potential high frequency generator
  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. EPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Art, museum
  • Aeronautics, composites &plastics
  • Digital applications (flat panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX110-DA-0LLX110-DA-1
High voltage rangekV5 - 1005 - 110
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600600
Beam angle°60 x 4060 x 40
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (EN12543)mm1,03,0
Steel penetration at max (*)mm1215
Max recommended temp.°C50°50°
Temperature switch°C70°70°
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duty cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Kg1616
TubeheadMetal-ceramicMetal-ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

LLX160-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX160-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for fi eld inspection especially where quality requirements and speed of inspection are essentials. The specific shape given to the head of the generator makes it easier to use on field where space is always restricted for instance in aerospace applications.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital applications
  • Constant potential high frequency generator
  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. XPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Aeronautics, composites & plastics
  • Building sites
  • Digital applications (flat panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX160-DA-0LLX160-DA-1
High voltage rangekV5 - 1605 - 160
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600900
Beam angle60° x 40°60° x 40°
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (IEC336)mm1,03,0
Steel penetration at max (*)mm50°50°
Max recommended temp.°C70°70°
Temperature switch°C70°70°
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duat cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Kg1616
TubeheadMetal-ceramicMetal-ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD = 700mm / Film Carestream Industrex AA400/D=2,0/t=10min.

Baltospot

LLX200-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX200-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for fi eld inspection especially where quality requirements and speed of inspection are essentials.

The specific shape given to the head of the generator makes it easier to use on field where space is always restricted for instance in aerospace applications.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital application

  • Constant potential high frequency generator

  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. XPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Aeronautics, composites & plastics
  • Building sites
  • Digital applications (fl at panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX200-DA-0LLX200-DA-1
High voltage rangekV5 - 2005 - 200
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600900
Beam angle°60 x 4060 x 40
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (EN12543)mm1,03,0
Steel penetration at max. (*)mm4244
Max recommended temp.°C5050
Temperature switch°C7070
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duty cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Kg1818
TubeheadMetal-CeramicMetal-Ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

LLX225-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX225-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator from the LLX Series that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for fi eld inspection especially where quality requirements and speed of inspection are essentials. The specific shape given to the head of the generator makes it easier to use on field where space is always restricted for instance in aerospace applications.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital application
  • Constant potential high frequency generator
  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. XPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Aeronautics, composites & plastics
  • Building sites
  • Digital applications (fl at panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX225-DA-0LLX225-DA-1
High voltage rangekV5 - 2255 - 225
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600900
Beam angle60° x 40°60° x 40°
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (EN12543)mm1,03,0
Steel penetration at max (*)mm4448
Max recommended temp.°C50°50°
Temperature switch°C70°70°
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duty cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Metal-CeramicMetal-Ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.