Loading

CERAM Series

The series is made of 3 different generators based on a ceramic insert with a 100% duty cycle. The generators are specifically designed to be operated in difficult environments with a constant output. All units have to be combined to one of the two available control units, CF2000 or Hand-X and are equipped with very lightweight new generation of cables.

Baltospot

CERAM 235

  • Product description
  • Main features
  • Key advantages
  • Most common applications

When you need a unit that can perform standard thicknesses inspections as well as occasionally heavy walled ones, the CERAM 235 is the perfect compromise.

Offering a maximum of 235 kV and 5 mA, the CERAM 235 combines all technological advantages of its big brother in the CERAM series and gives the flexibility of a unit smaller in size.

No compromises have been made to component selection or cooling, the unit is able to run on a 100% duty cycle thanks to its purposely designed tubehead and driving electronics.

This unit has to be combined to one of the two available type of control units (CF2000 or Hand X), with very lightweight new generation of cables..

  • Pulsed wave technology
  • Ceramic tube insert
  • Air cooled
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons
  • Full automatic preheating
  • Works on power generator
  • Very stable output 
  • Low consumption
  • Very reliable
  • Ergonomic guard rings 
  • Temperature pressure switch
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g Hand-X
  • Including a Geiger-Müller detector
  • CANON mil. metallic connectors
  • Steadiness & Sturdiness
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Foundries
  • Railway parts
  • Boiler or pressure vessels manufacturers
SpecificationsUnitsCERAM235
High voltage rangekV70 - 235
Tube current rangemA0,1 - 5
Maximum anode power dissipationWatt1175
Beam angle°40°
Focal spot size (IEC336)mm2 x 2
Steel penetration at max (*)mm43
Max recommended temp.°C50
Temperature switch°C70
Inherent fi ltrationmm (Be)1
Anode cooling typeAir
Duty cycle%100
MainsV180 - 260
Weight (without rings)Kg27
TubeheadCeramic
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

CERAM 35

  • Product description
  • Main features
  • Key advantages
  • Most common applications

Balteau NDT is known for its unique and unequalled engineering and manufacture of portable equipment. The CERAM 35 is the result of the latest evolution of electronic and physics of X-rays. It has been engineered to meet and exceed your needs for now and the future.

The CERAM 35 is delivering 300 kV and 5 mA with a duty cycle of 100% for an incredible image contrast even at full power. Thanks to a purposely designed tubehead and driving electronics, the CERAM 35 is offering to the user both duty cycle and an enormous power to fi t any important requirements.

  • Pulsed wave technology
  • Ceramic tube insert
  • Air cooled
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons
  • Full automatic preheating
  • Works on power generator
  • Very stable output 
  • Low consumption
  • Very reliable
  • Ergonomic guard rings 
  • Temperature pressure switch
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g Hand-X including a Geiger-Müller detector
  • CANON mil. metallic connectors
  • Steadiness & Sturdiness
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Foundries
  • Railway parts
  • Boiler or pressure vessels manufacturers
SpecificationsUnitsCERAM35
High voltage rangekV100 - 300
Tube current rangemA0,5 - 5
Maximum anode power dissipationWatt1500
Beam angle°40°
Focal spot size (IEC336)mm2,5 x 2,5
Steel penetration at max (*)mm58
Max recommended temp.°C50
Temperature switch°C70
Inherent filtrationmm (Be)1
Anode cooling typeAir
Duty cycle%100
MainsV180 - 260
Weight (without rings)kG29
TubeheadCeramic
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.