Loading

Crawler Series

The Baltospot for Crawlers series is once again the evidence of the long time expertise of Balteau NDT in building reliable, powerful, robust and highly compatible X-ray equipments used for Pipe inspections.

Balteau NDT offers a complete assembly including the mechanical carrier, the well known Balteau NDT X-ray generator, the chopper and a range of accessories in order to make the most out of this equipment.

Baltospot

GFC 160C (For crawler)

  • Product description
  • Most common applications

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry. Any DC voltages within the range of 72 to 130v can be selected and applied to the generator. An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose output and guarantees image quality consistency all along the exposure time. This specific process, is also improving the operating possibilities of the battery pack. Indeed much more exposures can be taken. This process improves the battery lifetime thanks to a better management of discharge cycles.

  • Oil & gas
SpecificationsUnitsGFC160C
High voltage rangekV112 - 160
Approx. tube outputmA3
Beam angle°360 x 40
Focal spot size (IEC336)mm4 x 0,9
Max. currentA4,5
Steel penetration at max (*)mm12,5
Working temperature°C-10 to 40
Inherent fi ltrationmm7 Al
Anode cooling typeAir
Duty cycle%50% at 35°C
InsulationSF6 gas
MainsV72 - 130
WeightKg11
TubeheadGlass
Control unitCF3

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

GFC 200C (For crawler)

  • Product description
  • Most common applications

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry. Any DC voltages within the range of 72 to 130v can be selected and applied to the generator. An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose  output and guarantees image quality consistency all along the exposure time. This specific process, is also improving not only the operating possibilities of the battery pack, thus much more exposures can be taken before the batteries are discharged, but also it improves the battery lifetime by a better management of discharge cycles.

  • Oil & gas
SpecificationsUnitsGFC200C
High voltage rangekV140 - 200
Approx. tube outputmA3
Beam angle°360 x 45
Focal spot size (IEC336)mm4 x 1,2
Max. currentA9
Steel penetration at max (*)mm24
Working temperature°C-10 to 40
Inherent filtrationmm9 Al
Anode cooling typeAir
Duty cycle%50% at 35°C
InsulationSF6 gas
MainsV72 - 130
WeightKg20
Tubehead Glass
Control unitCF3

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

GFC 300C (For crawler)

  • Product description
  • Most common applications

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry. Any DC voltages  within the range of 72 to 130 V can be selected and applied to the generator. An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose output and guarentees image quality consistency all along the exposure time. This specific process is also improving not only tje operating possibilities of the battery pack, thus much more exposures can be taken before the batteries are discharged, but also it improves the battery lifetime by a better management of discharge cycles.

  • Oil & gas
SpecificationsUnitsGFC300C
High voltage rangekV150 - 300
Approx. tube outputmA3
Beam angle°360 x 45
Focal spot size (IEC336)mm4 x 1,3
Max. currentA12
Steel penetration at max (*)mm44
Working temperature°C-10 to 40
Inherent filtrationmm9 Al
Anode cooling typeAir
Duty cycle%50% at 35°C
InsulationSF6 gas
MainsV72 - 130
WeightKg23,5
TubeheadGlass
Control unitCF3

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

GCP180C (For crawler)

  • Product description
  • Most common applications

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry.


An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose output and guarantees image quality consistency all along the exposure time.
This specific process, is also improving the operating possibilities of the battery pack. Indeed much more exposures can be taken. This process improves the battery lifetime thanks to a better management of discharge cycles.

  • Oil & gas
SpecificationsUnitsGCP180C
High voltage rangekV90 - 180
Approx. tube outputmA2,4
Beam angle°360 x 45
Focal spot size (IEC336)mm5 x 0,6
Max. currentA10
Steel penetration at max (*)mm26
Working temperature°C-40 to 70
Inherent fi ltrationmm3 Al + 2 glass
Anode cooling typeAir
Duty cycle%50
InsulationOil
Mains DC supplyV43 - 60
WeightKg16,7
TubeheadGlass

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=1min.

Baltospot

CF3 + CFR

  • Product description
  • Characteristics
  • Key advantages

A generator needs a reliable, flexible and stable power supply for working. With a Crawler, this power supply is brought by a battery set embarked in the mechanical carrier. The CF3 is the power converter (Chopper) between the batteries and the Generator. However the CF3 is also an intelligent regulator which will be able to give out of your batteries the most stable and constant output all along your exposures. Our Chopper CF3 is the result of the technology evolution that is applicable in electronics nowadays.

Based on the well known CF1 that has equipped several generations of Crawlers around the globe, this new model has also been developed to be used with the major brands of Crawler Manufactures.

The CF3 features a separate set up and remote control device (CFR) which allows you to manage parameters and preheating functions.

  • Drives the crawler generators type GFC
  • Automatic recognition system
  • Automatic preheating
  • Controlled by microprocessor
  • Parameters and last exposures held into
    memory
  • Several languages available
  • User friendly 
  • Compact & robust industrial design
  • Intelligent regulator for stable and constant output
  • Low power requirement
  • Easy transport : robust casing
  • Ergonomic CFR remote control
  • CANON mil. Metallic connectors
SpecificationsUnitsCF3 +CFR
Mains supply DCV100 - 140
Duty cycle%100
Operating temperature°C-10 to 45
CF3 Power supply with 3 m cableVAC230 (50 - 60Hz)
Connection cable to X-ray generatormUp to 20
kV rangekV100 - 300
kV adjustment stepkV/step10 - 20 - 30
CurrentmA3
mA adjustment stepmA/step0,1
Automatic preheating calculationYes
Preheating Monitoring through CFRYes
BuzzerYes