Loading

Baltospot

LLX110-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX110-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for field inspection especially where quality requirements and speed of inspection are essentials.

The LLX110-DA has been engineered especially to answer inspection of light components in places where x-ray exposures are limited.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital applications
  • Constant potential high frequency generator
  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. EPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Art, museum
  • Aeronautics, composites &plastics
  • Digital applications (flat panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX110-DA-0LLX110-DA-1
High voltage rangekV5 - 1005 - 110
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600600
Beam angle°60 x 4060 x 40
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (EN12543)mm1,03,0
Steel penetration at max (*)mm1215
Max recommended temp.°C50°50°
Temperature switch°C70°70°
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duty cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Kg1616
TubeheadMetal-ceramicMetal-ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

LLX160-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX160-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for fi eld inspection especially where quality requirements and speed of inspection are essentials. The specific shape given to the head of the generator makes it easier to use on field where space is always restricted for instance in aerospace applications.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital applications
  • Constant potential high frequency generator
  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. XPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Aeronautics, composites & plastics
  • Building sites
  • Digital applications (flat panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX160-DA-0LLX160-DA-1
High voltage rangekV5 - 1605 - 160
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600900
Beam angle60° x 40°60° x 40°
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (IEC336)mm1,03,0
Steel penetration at max (*)mm50°50°
Max recommended temp.°C70°70°
Temperature switch°C70°70°
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duat cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Kg1616
TubeheadMetal-ceramicMetal-ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD = 700mm / Film Carestream Industrex AA400/D=2,0/t=10min.

Baltospot

LLX200-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX200-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for fi eld inspection especially where quality requirements and speed of inspection are essentials.

The specific shape given to the head of the generator makes it easier to use on field where space is always restricted for instance in aerospace applications.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital application

  • Constant potential high frequency generator

  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. XPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Aeronautics, composites & plastics
  • Building sites
  • Digital applications (fl at panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX200-DA-0LLX200-DA-1
High voltage rangekV5 - 2005 - 200
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600900
Beam angle°60 x 4060 x 40
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (EN12543)mm1,03,0
Steel penetration at max. (*)mm4244
Max recommended temp.°C5050
Temperature switch°C7070
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duty cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Kg1818
TubeheadMetal-CeramicMetal-Ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

LLX225-DA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The LLX225-DA is a high frequency constant potential Directional Air cooled, portable X-ray generator from the LLX Series that can be used in combination with digital detectors.

LLX is the latest result of 65 years of expertise of Balteau in portable units combined to 25 years of Constant Potential equipment manufacture. LLX is the answer to your requirements for fi eld inspection especially where quality requirements and speed of inspection are essentials. The specific shape given to the head of the generator makes it easier to use on field where space is always restricted for instance in aerospace applications.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output for digital application
  • Constant potential high frequency generator
  • Current up to 12mA
  • Metal-ceramic tube
  • Two focal spot available with Beryllium window
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • RS232 serial link designed to be connected to digital detectors (ex. XPro Series) and computers
  • Works on power generator
  • CANON mil. metallic connectors
  • Aeronautics, composites & plastics
  • Building sites
  • Digital applications (fl at panels, CR or linear detectors)
  • X-ray cabinets
SpecificationsUnitsLLX225-DA-0LLX225-DA-1
High voltage rangekV5 - 2255 - 225
Tube current rangemA0,5 - 120,5 - 12
Maximum anode power dissipationWatt600900
Beam angle60° x 40°60° x 40°
Focal spot size (IEC336)mm0,4 x 0,41,5 x 1,5
Focal spot size (EN12543)mm1,03,0
Steel penetration at max (*)mm4448
Max recommended temp.°C50°50°
Temperature switch°C70°70°
Inherent filtrationmm (Be)0,80,8
Anode cooling typeAirAir
Duty cycle%100100
MainsV180 - 260180 - 260
Weight (without rings)Metal-CeramicMetal-Ceramic
Control unitDC1 or Hand-XDDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

CERAM 235

  • Product description
  • Main features
  • Key advantages
  • Most common applications

When you need a unit that can perform standard thicknesses inspections as well as occasionally heavy walled ones, the CERAM 235 is the perfect compromise.

Offering a maximum of 235 kV and 5 mA, the CERAM 235 combines all technological advantages of its big brother in the CERAM series and gives the flexibility of a unit smaller in size.

No compromises have been made to component selection or cooling, the unit is able to run on a 100% duty cycle thanks to its purposely designed tubehead and driving electronics.

This unit has to be combined to one of the two available type of control units (CF2000 or Hand X), with very lightweight new generation of cables..

  • Pulsed wave technology
  • Ceramic tube insert
  • Air cooled
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons
  • Full automatic preheating
  • Works on power generator
  • Very stable output 
  • Low consumption
  • Very reliable
  • Ergonomic guard rings 
  • Temperature pressure switch
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g Hand-X
  • Including a Geiger-Müller detector
  • CANON mil. metallic connectors
  • Steadiness & Sturdiness
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Foundries
  • Railway parts
  • Boiler or pressure vessels manufacturers
SpecificationsUnitsCERAM235
High voltage rangekV70 - 235
Tube current rangemA0,1 - 5
Maximum anode power dissipationWatt1175
Beam angle°40°
Focal spot size (IEC336)mm2 x 2
Steel penetration at max (*)mm43
Max recommended temp.°C50
Temperature switch°C70
Inherent fi ltrationmm (Be)1
Anode cooling typeAir
Duty cycle%100
MainsV180 - 260
Weight (without rings)Kg27
TubeheadCeramic
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

CERAM 35

  • Product description
  • Main features
  • Key advantages
  • Most common applications

Balteau NDT is known for its unique and unequalled engineering and manufacture of portable equipment. The CERAM 35 is the result of the latest evolution of electronic and physics of X-rays. It has been engineered to meet and exceed your needs for now and the future.

The CERAM 35 is delivering 300 kV and 5 mA with a duty cycle of 100% for an incredible image contrast even at full power. Thanks to a purposely designed tubehead and driving electronics, the CERAM 35 is offering to the user both duty cycle and an enormous power to fi t any important requirements.

  • Pulsed wave technology
  • Ceramic tube insert
  • Air cooled
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons
  • Full automatic preheating
  • Works on power generator
  • Very stable output 
  • Low consumption
  • Very reliable
  • Ergonomic guard rings 
  • Temperature pressure switch
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g Hand-X including a Geiger-Müller detector
  • CANON mil. metallic connectors
  • Steadiness & Sturdiness
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Foundries
  • Railway parts
  • Boiler or pressure vessels manufacturers
SpecificationsUnitsCERAM35
High voltage rangekV100 - 300
Tube current rangemA0,5 - 5
Maximum anode power dissipationWatt1500
Beam angle°40°
Focal spot size (IEC336)mm2,5 x 2,5
Steel penetration at max (*)mm58
Max recommended temp.°C50
Temperature switch°C70
Inherent filtrationmm (Be)1
Anode cooling typeAir
Duty cycle%100
MainsV180 - 260
Weight (without rings)kG29
TubeheadCeramic
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

GFD 165

  • Product description
  • Main features
  • Key advantages
  • Most common applications

A number one hit for years, the GFD165 is the smallest unit of the GF series.

With a maximum of 160 kV and 5 mA, the GFD165 is a compact gas insulated unit designed for applications where size and weight matter. The GFD165 is the ideal machine for field applications where the unit needs to be frequently moved or inserted in tiny spaces. With regards to its 5mA and pulsed wave technology, the unit can penetrate medium to very thin materials, metallic or composites. It will easily surpass the poor contrast of Isotopes and will be a very good replacement in lower thickness ranges where Isotopes are generally not allowed.

This unit uses the same driving electronic and technologies as the CERAM but is equipped with the standard well proven glass tube of Balteau NDT.

  • High frequency
  • Air cooled
  • Very small & lightweight
  • Unique energy recovery module
  • Hand-X wireless remote operation availability
  • Rugged and light control unit 
  • Safety first, x-ray start with 2 buttons 
  • Full automatic preheating 
  • Cables with reduced size and weight
  • Works on power generator
  • High stability output dose
  • Lightweight
  • Can de be delivered with our 900g Hand-X
  • Including a Geiger-Müller detector
  • Low power consumption
  • Unmatched safety
  • Very reliable
  • Long term stable density
  • Ergonomic guard rings
  • CANON mil. metallic connectors
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Tanks, reservoirs & pressure vessels
  • Inspection companies & training centers
  • Conventional films or CR applications
SpecificationsUnitsGFD165
High voltage rangekV50 - 160
Tube current rangemA1 - 5
Maximum anode power dissipationWatt800
Beam angle°55°
Focal spot size (IEC336)mm1,5 x 1,5
Steel penetration at max (*)mm17
Max recommended temp.°C50
Temperature switch°C70
Inherent filtrationmm6 Al
Anode cooling typeAir
Duty cycle%100**
MainsV180 - 260
Weight (without rings)Kg12
TubeheadGlass
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.
**At a temperature of 30°C reduced mA.