Loading

Baltospot

LLX200-PA

  • Product description
  • Main features
  • Key advantages
  • Most common applications

Completing its range of very lightweight and powerful portable X-ray generators, Balteau NDT is adding the panoramic version of its well known LLX Series.

Air cooled and actively powerful with the smallest carbon footprint of its generation, LLX200-PA will satisfy your most complex applications and expectations.

Used in Aerospace business mostly, this compact unit can also be used in piping industry, Oil & Gas, tank, etc.

The innovative cradle will help you to not only transport this unit easily but also to adopt any position as required by your daily jobs.

LLX is controlled by a full digital control unit (DC1) using the energy saving concept of the BALTOSPOT series and our well known Hand-X® wireless remote control that is also available for your best safety.

  • Extremely stable dose output
  • Constant potential high frequency generator
  • Current up to 12mA
  • Panoramic metal-ceramic tubehead
  • Factory setted beam homogeneity
  • Easy adaptation to crawler
  • Energy recovery module
  • Safety first, x-ray start with 2 buttons
  • Serial link through RS232
  • Low weight
  • Ergonomic rubber handle
  • Extremely small head diameter
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g hand-XD
  • Including a Geiger-Müller detector
  • Works on power generator
  • CANON mil. metallic connectors
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Tanks, reservoirs & pressure vessels
  • Small enclosure x-ray
  • Aeronautics
  • Oil & Gas
  • Conventional films
SpecificationsUnitsLLX200-PA-0
High voltage rangekV5 - 200
Tube current rangemA0,5 - 12
Maximum anode power dissipationWatt600
Beam angle°360 x 40
Focal spot size (EN12543)mm0,4 x 0,4
Steel penetration at max (*)mm35
Max recommended temp.°C50°
Temperature switch°C70°
Inherent fi ltrationmm0,4 Fe/Ni/Co
Anode cooling typeAir
Duty cycle%100
MainsV180 - 260
Weight (without rings)Kg18
TubeheadMetal-Ceramic
Control unitDC1 or Hand-XD

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

CERAM 35P

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The Ceram Series is a reference in the X-Ray industry for reliability, high performances and robustness.

The Ceram 35P is the panoramic brand new portable generators designed by Balteau NDT and is offering no less than 300kV, 5mA and 100% duty cycle for an incredible image contrast even at full power.

This unit will surely become a reference on the market as it can be classified as a high power portable unit and can be operated with our classic CF2000 control unit but also with our well known Hand-X Wireless Remote Control.

Gas insulation and right components selection have succeeded in producing one of the lightest 300kV panoramic unit.. The unit is extremely versatile and is confirming our reputation of builders for machines that are really made for fi eld.

  • Pulsed wave technology
  • Panoramic ceramic tube insert
  • Air cooled
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons
  • Factory set beam homogeneity
  • Works on power generator
  • Very stable output 
  • Low consumption
  • Very reliable
  • Ergonomic guard rings 
  • Temperature pressure switch
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g Hand-X
  • Including a Geiger-Müller detector
  • CANON mil. metallic connectors
  • Steadiness & Sturdiness
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Thanks, reservoirs & pressure vessels
  • Inspection companies & training centers
  • Conventional films or CR applications
SpecificationsUnitsCERAM35P
High voltage rangekV100 - 300
Tube current rangemA0,5 - 5
Maximum anode power dissipationWatt1500
Beam angle360 ° x 40°
Focal spot size (IEC336)mmØ 4 x 1
Steel penetration at max (*)mm49
Max recommended temp.°C50°
Temperature switch°C70°
Inherent filtrationmm1 Nickel/Fe
Anode cooling typeAir
Duty cycle%100
MainsV180 - 260
Weight (without rings)Kg30
TubeheadCeramic
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

GFC 165

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The GFC165 is a panoramic portable unit derived from our well known Crawler series but designed to be operated on field without mechanical carriage.

It will easily surpass the poor contrast of Isotopes and will be a very interesting replacement in lower thickness ranges where Isotopes are generally not allowed.

In combination with a GFD (Directional) or a CERAM, the GFC165 is the ideal machine for field applications where the unit needs to be frequently moved or inserted in tiny spaces. Guard rings can be removed and a cradle can be used to perform difficult inspections.

This unit has to be combined to one of the two available type of control units (CF2000 or Hand X), with very lightweight new generation of cables..

  • High frequency

  • Air cooled
  • Panoramic tubehead
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons 
  • Full automatic preheating 
  • Cables with reduced size and weight 
  • Extremely compact & lightweight
  • Factory set beam homogeneity
  • Low power requirement 
  • High stability output dose
  • Lightweight
  • Can de be delivered with our 900g Hand-X
  • Including a Geiger-Müller detector
  • Low power consumption
  • Unmatched safety
  • Very reliable
  • Long term stable density
  • Ergonomic guard rings
  • CANON mil. metallic connectors
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Tanks, reservoirs & pressure vessels
  • Inspection companies & training centers
  • Conventional films or CR applications
SpecificationsUnitsGFC165
High voltage rangekV50 - 160
Tube current rangemA1 - 5
Maximum anode power dissipationWatt800
Beam angle360° x 40°
Focal spot size (IEC336)mmØ4 x 0.9
Steel penetration at max (*)mm14
Max recommended temp.°C50°
Temperature switch°C70°
Inherent filtrationmm (Al)7
Anode cooling typeAir
Duty cycle%100**
MainsV180 - 260
Weight (without rings)Kg12,3
TubeheadGlass
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.
**At a temperature of 30°C reduced mA.

Baltospot

GFC 205

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The GFC205 is a panoramic portable unit derived from our well known Crawler series but designed to be operated on field without mechanical carriage. This unit has then naturally inherited the reliability of the crawler technology of Balteau NDT.

The GFC205 can deliver up to 200 kV and 5 mA and can be classified in the range of middle power units available at Balteau NDT.

It will easily surpass the poor contrast of Isotopes and will be a very interesting replacement in medium thickness ranges where Isotopes are generally not performing well.

In combination with a GFD (Directional) or a CERAM, the GFC205 will allow you to perform all kind of exposures with a limited number of units.

  • High frequency
  • Air cooled
  • Panoramic tubehead
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons 
  • Full automatic preheating 
  • Cables with reduced size and weight 
  • Panoramic beam
  • Factory set beam homogeneity
  • Serial link through RS232
  • High stability output dose
  • Lightweight
  • Can de be delivered with our 900g Hand-X
  • Including a Geiger-Müller detector
  • Low power consumption
  • Unmatched safety
  • Very reliable
  • Long term stable density
  • Ergonomic guard rings
  • CANON mil. metallic connectors
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Tanks, reservoirs & pressure vessels
  • Inspection companies & training centers
  • Conventional films or CR applications
SpecificationsUnitsGFC205
High voltage rangekV70 - 200
Tube current rangemA1,5 - 5
Maximum anode power dissipationWatt1000
Beam angle360° x 40°
Focal spot size (IEC336)mmØ5 x 1,2
Steel penetration at max (*)mm29
Max recommended temp.°C50°
Temperature switch°C70°
Inherent filtrationmm (Al)9,1
Anode cooling typeAir
Duty cycle%100**
MainsV180 - 260
Weight (without rings)Kg25,5
TubeheadGlass
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.
**At a temperature of 30°C reduced mA

Baltospot

GFC 305

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The GFC305 is a panoramic portable unit derived from our well known Crawler series but designed to be operated on field without mechanical carriage. This unit has then naturally inherited the reliability of the crawler technology of Balteau NDT.

The GFC305 can deliver up to 300 kV and 5 mA and can be classified in the range of high power units available at Balteau NDT.

It will easily surpass the poor contrast of Isotopes and will be a very interesting replacement in medium thickness ranges where Isotopes are generally not performing well.

In combination with a GFD (Directional) or a CERAM, the GFC305 will allow you to perform all kind of exposures with a limited number of units.

  • High frequency
  • Air cooled
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons 
  • Full automatic preheating 
  • Cables with reduced size and weight 
  • Panoramic beam
  • Factory set beam homogeneity
  • Serial link through RS232
  • High stability output dose
  • Can de be delivered with our 900g Hand-X
  • Including a Geiger-Müller detector
  • Low power consumption
  • Unmatched safety
  • Very reliable
  • Long term stable density
  • Ergonomic guard rings
  • CANON mil. metallic connectors
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Tanks, reservoirs & pressure vessels
  • Inspection companies & training centers
  • Conventional films or CR applications
SpecificationsUnitsGFC305
High voltage rangekV140 - 300
Tube current rangemA1 - 5
Maximum anode power dissipationWatt1500
Beam angle360° x 40°
Focal spot size (IEC336)mmØ5 x 1,3
Steel penetration at max (*)mm49
Max recommended temp.°C50°
Temperature switch°C70°
Inherent filtrationmm6 Al + 1,2 Cu
Anode cooling typeAir
Duty cycle%100**
MainsV180 - 260
Weight (without rings)Kg35
TubeheadGlass
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.
**At a temperature of 30°C reduced mA.

Baltospot

GFC 160C (For crawler)

  • Product description
  • Most common applications

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry. Any DC voltages within the range of 72 to 130v can be selected and applied to the generator. An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose output and guarantees image quality consistency all along the exposure time. This specific process, is also improving the operating possibilities of the battery pack. Indeed much more exposures can be taken. This process improves the battery lifetime thanks to a better management of discharge cycles.

  • Oil & gas
SpecificationsUnitsGFC160C
High voltage rangekV112 - 160
Approx. tube outputmA3
Beam angle°360 x 40
Focal spot size (IEC336)mm4 x 0,9
Max. currentA4,5
Steel penetration at max (*)mm12,5
Working temperature°C-10 to 40
Inherent fi ltrationmm7 Al
Anode cooling typeAir
Duty cycle%50% at 35°C
InsulationSF6 gas
MainsV72 - 130
WeightKg11
TubeheadGlass
Control unitCF3

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

GFC 200C (For crawler)

  • Product description
  • Most common applications

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry. Any DC voltages within the range of 72 to 130v can be selected and applied to the generator. An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose  output and guarantees image quality consistency all along the exposure time. This specific process, is also improving not only the operating possibilities of the battery pack, thus much more exposures can be taken before the batteries are discharged, but also it improves the battery lifetime by a better management of discharge cycles.

  • Oil & gas
SpecificationsUnitsGFC200C
High voltage rangekV140 - 200
Approx. tube outputmA3
Beam angle°360 x 45
Focal spot size (IEC336)mm4 x 1,2
Max. currentA9
Steel penetration at max (*)mm24
Working temperature°C-10 to 40
Inherent filtrationmm9 Al
Anode cooling typeAir
Duty cycle%50% at 35°C
InsulationSF6 gas
MainsV72 - 130
WeightKg20
Tubehead Glass
Control unitCF3

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

GFC 300C (For crawler)

  • Product description
  • Most common applications

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry. Any DC voltages  within the range of 72 to 130 V can be selected and applied to the generator. An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose output and guarentees image quality consistency all along the exposure time. This specific process is also improving not only tje operating possibilities of the battery pack, thus much more exposures can be taken before the batteries are discharged, but also it improves the battery lifetime by a better management of discharge cycles.

  • Oil & gas
SpecificationsUnitsGFC300C
High voltage rangekV150 - 300
Approx. tube outputmA3
Beam angle°360 x 45
Focal spot size (IEC336)mm4 x 1,3
Max. currentA12
Steel penetration at max (*)mm44
Working temperature°C-10 to 40
Inherent filtrationmm9 Al
Anode cooling typeAir
Duty cycle%50% at 35°C
InsulationSF6 gas
MainsV72 - 130
WeightKg23,5
TubeheadGlass
Control unitCF3

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

GCP180C (For crawler)

  • Product description
  • Most common applications

The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry.


An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose output and guarantees image quality consistency all along the exposure time.
This specific process, is also improving the operating possibilities of the battery pack. Indeed much more exposures can be taken. This process improves the battery lifetime thanks to a better management of discharge cycles.

  • Oil & gas
SpecificationsUnitsGCP180C
High voltage rangekV90 - 180
Approx. tube outputmA2,4
Beam angle°360 x 45
Focal spot size (IEC336)mm5 x 0,6
Max. currentA10
Steel penetration at max (*)mm26
Working temperature°C-40 to 70
Inherent fi ltrationmm3 Al + 2 glass
Anode cooling typeAir
Duty cycle%50
InsulationOil
Mains DC supplyV43 - 60
WeightKg16,7
TubeheadGlass

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=1min.