Loading

CERAM Series

The series is made of 3 different generators based on a ceramic insert with a 100% duty cycle. The generators are specifically designed to be operated in difficult environments with a constant output. All units have to be combined to one of the two available control units, CF2000 or Hand-X and are equipped with very lightweight new generation of cables.

Baltospot

CERAM 235

  • Product description
  • Main features
  • Key advantages
  • Most common applications

When you need a unit that can perform standard thicknesses inspections as well as occasionally heavy walled ones, the CERAM 235 is the perfect compromise.

Offering a maximum of 235 kV and 5 mA, the CERAM 235 combines all technological advantages of its big brother in the CERAM series and gives the flexibility of a unit smaller in size.

No compromises have been made to component selection or cooling, the unit is able to run on a 100% duty cycle thanks to its purposely designed tubehead and driving electronics.

This unit has to be combined to one of the two available type of control units (CF2000 or Hand X), with very lightweight new generation of cables..

  • Pulsed wave technology
  • Ceramic tube insert
  • Air cooled
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons
  • Full automatic preheating
  • Works on power generator
  • Very stable output 
  • Low consumption
  • Very reliable
  • Ergonomic guard rings 
  • Temperature pressure switch
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g Hand-X
  • Including a Geiger-Müller detector
  • CANON mil. metallic connectors
  • Steadiness & Sturdiness
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Foundries
  • Railway parts
  • Boiler or pressure vessels manufacturers
SpecificationsUnitsCERAM235
High voltage rangekV70 - 235
Tube current rangemA0,1 - 5
Maximum anode power dissipationWatt1175
Beam angle°40°
Focal spot size (IEC336)mm2 x 2
Steel penetration at max (*)mm43
Max recommended temp.°C50
Temperature switch°C70
Inherent fi ltrationmm (Be)1
Anode cooling typeAir
Duty cycle%100
MainsV180 - 260
Weight (without rings)Kg27
TubeheadCeramic
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

CERAM 35P

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The Ceram Series is a reference in the X-Ray industry for reliability, high performances and robustness.

The Ceram 35P is the panoramic brand new portable generators designed by Balteau NDT and is offering no less than 300kV, 5mA and 100% duty cycle for an incredible image contrast even at full power.

This unit will surely become a reference on the market as it can be classified as a high power portable unit and can be operated with our classic CF2000 control unit but also with our well known Hand-X Wireless Remote Control.

Gas insulation and right components selection have succeeded in producing one of the lightest 300kV panoramic unit.. The unit is extremely versatile and is confirming our reputation of builders for machines that are really made for fi eld.

  • Pulsed wave technology
  • Panoramic ceramic tube insert
  • Air cooled
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons
  • Factory set beam homogeneity
  • Works on power generator
  • Very stable output 
  • Low consumption
  • Very reliable
  • Ergonomic guard rings 
  • Temperature pressure switch
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g Hand-X
  • Including a Geiger-Müller detector
  • CANON mil. metallic connectors
  • Steadiness & Sturdiness
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Thanks, reservoirs & pressure vessels
  • Inspection companies & training centers
  • Conventional films or CR applications
SpecificationsUnitsCERAM35P
High voltage rangekV100 - 300
Tube current rangemA0,5 - 5
Maximum anode power dissipationWatt1500
Beam angle360 ° x 40°
Focal spot size (IEC336)mmØ 4 x 1
Steel penetration at max (*)mm49
Max recommended temp.°C50°
Temperature switch°C70°
Inherent filtrationmm1 Nickel/Fe
Anode cooling typeAir
Duty cycle%100
MainsV180 - 260
Weight (without rings)Kg30
TubeheadCeramic
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

CERAM 35

  • Product description
  • Main features
  • Key advantages
  • Most common applications

Balteau NDT is known for its unique and unequalled engineering and manufacture of portable equipment. The CERAM 35 is the result of the latest evolution of electronic and physics of X-rays. It has been engineered to meet and exceed your needs for now and the future.

The CERAM 35 is delivering 300 kV and 5 mA with a duty cycle of 100% for an incredible image contrast even at full power. Thanks to a purposely designed tubehead and driving electronics, the CERAM 35 is offering to the user both duty cycle and an enormous power to fi t any important requirements.

  • Pulsed wave technology
  • Ceramic tube insert
  • Air cooled
  • Unique energy recovery module
  • Rugged and light control unit
  • Safety first, x-ray start with 2 buttons
  • Full automatic preheating
  • Works on power generator
  • Very stable output 
  • Low consumption
  • Very reliable
  • Ergonomic guard rings 
  • Temperature pressure switch
  • Full automatic preheating process
  • Low power requirement
  • Cables with reduced size and weight
  • Can be delivered with our 900g Hand-X including a Geiger-Müller detector
  • CANON mil. metallic connectors
  • Steadiness & Sturdiness
  • Oil & Gas
  • Shipyard building & Building sites
  • Petrochemical & Power plants
  • Foundries
  • Railway parts
  • Boiler or pressure vessels manufacturers
SpecificationsUnitsCERAM35
High voltage rangekV100 - 300
Tube current rangemA0,5 - 5
Maximum anode power dissipationWatt1500
Beam angle°40°
Focal spot size (IEC336)mm2,5 x 2,5
Steel penetration at max (*)mm58
Max recommended temp.°C50
Temperature switch°C70
Inherent filtrationmm (Be)1
Anode cooling typeAir
Duty cycle%100
MainsV180 - 260
Weight (without rings)kG29
TubeheadCeramic
Control unitCF2000 or Hand-X

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltospot

Hand-X

  • Product description
  • Characteristics
  • Key advantages

The Hand-X® is the most advanced of all control units and is able to drive any of the BALTOSPOT® generators.

The Hand-X® is a revolutionary wireless remote control which can operate a generator remotely from up to 100 m in open fields.

The purpose of this is certainly the freedom of moves in cluttered environment like shipyards or places where cables are at risk or never long enough because of mandatory twists and turns around existing infrastructures. Having the control at your fi ngertips at all time including exposure is also of great advantage in terms of security as you can interrupt exposure at anytime if your surveyed area is not cleared anymore. The built in Dosimeter completes the safety oriented features of the unit by providing the operator a reliable and convenient monitoring of exposure at the very place where he or she stands. The Hand-X® Power connected to the generator has specifi cally been designed to cope with harsh environment and bad power supplies.

  • Wireless remote control
  • Drives the pulsed generators
  • Automatic recognition system
  • Automatic preheating
  • Controlled by microprocessor
  • Works with up to 1500W generators
  • Parameters and last exposures held into
    memory
  • Several languages available
  • User friendly 
  • 900 g. wireless remote control
  • Integrated GM detector
  • RS232 (option)
  • Can be used in direct mode
  • Compact & robust industrial design
  • Designed for a harsh environment
  • Stable and constant output even with bad
    power supply
  • Low power requirement
  • Ergonomic keypad and numpad
  • 4 lines display : clear indications
  • Safety oriented: X-ray start with 2 buttons
  • CANON mil. Metallic connectors
SpecificationsUnitsHand-X
Mains supply ACV170 to 260
FrequencyHz45 to 66
Duty cycle%100
Operating temperature°C-10 to 50
ConnectorsMetallic military type. Independent earth screw
CasingAluminium, rough construction with protective handles and metallic cover
kV min stepkV1
mA min stepmA0,1
Time min steps1 up to 99 min 59 s
Keypad24 keys embossed surface, anti scratch long life surface treatment
Automatic preheatingYes (90 sec. minimum)
Memories100 last exposure, 100 memories
Display4 lines, crystal clear, green back lighting, adjustable contrast
Warning lights and safety device3 steps X-ray ON key, lockable emergency stop switch (CE)
Warning lights and safety device3 positions key switch, Buzzer, Alphanumeric messages and LED
BatteryInternal accumulator (2,5A) - 8 hours charge capacity
Weight12 kg + 0,9 kg (Remote control)

Baltospot

CF2000

  • Product description
  • Characteristics
  • Key advantages

This lightweight control unit is one of the two possible interface between any of the BALTOSPOT® pulsed wave generators and the operator.

This power unit has specifically been designed to cope with harsh environment and bad power supplies. Indeed, it is able to handle bad power supplies like the one delivered by some power generators without affecting the dose output neither your image quality: the result is always a very stable and constant output no matter what power feeds the unit.

As always, Balteau is safety oriented and nothing has been left aside in that field. The waterproof ergonomic keypad and the large robust handles attached on the side are making it ideal for on site jobs as well as desktop uses. The 4 lines backlit clear display is giving at all time the necessary indications to the users about the status of operations. A convenient bright yellow cover is protecting your unit when not in use.

  • Drives the pulsed generators
  • Automatic recognition system
  • Automatic preheating
  • Controlled by microprocessor
  • Works with up to 1500W generators
  • Parameters and last exposures held into
    memory
  • Several languages available
  • User friendly 
  • Compact & robust industrial design
  • Designed for a harsh environment
  • Stable and constant output even with bad
    power supply
  • Low power requirement
  • Easy transport : robust casing
  • Ergonomic keypad and numpad
  • 4 lines display : clear indications
  • Safety oriented: X-ray start with 2 buttons
  • Lightweight cables
  • CANON mil. Metallic connectors
SpecificationsUnitsCF2000
Mains supply ACV170 to 260
FrequencyHz45 to 66
Duty cycle%100
Operating temperature°C-10 to 50
ConnectorsMetallic military type. Independent earth screw
CasingAluminium, rough construction with protective handles and metallic cover
kV min stepkV1
mA min stepmA0,1
Time min steps1 up to 99 min 59 s
Keypad24 keys embossed surface, anti scratch long life surface treatment
Automatic preheatingYes (90 sec. minimum)
Memories100 last exposure, 100 memories
Display4 lines, crystal clear, green back lighting, adjustable contrast
Warning lights and safety device3 steps X-ray ON key, lockable emergency stop switch (CE)
Warning lights and safety device3 positions key switch, Buzzer, Alphanumeric messages and LED
WeightKg13