Loading

XSD Series

A full X-ray equipment is made up of a generator (XSD), a control unit (LS1), a tubehead (TSD or TSC) and a cooling unit (WCU or OACU). Balteau XSD generators are 19’’ racks, built around a sealed, oil and gas free, solid stage voltage multiplier. SMD (surface mount devices) electronic is used to reduce maintenance time, size and weight. XSD are either monopolar or bipolar: generators are 100, 160, 225, 320, 420 and 450 kV. Powers available are 4 to 4,5 kW.

Baltograph

XSD160

  • Product description
  • Main features
  • Key advantages
  • Most common applications

Introducing the Baltograph series, the XSD160 is the first unit of a complete set based on a solid insulation HV module.

Completely renewed during summer 2014, it keeps all previous features but has been made with the lastest available components, reduced in size, weight and the most important, is more powerfull, offering 4000W & up to 50 mA. This technology not only frees you from very specialized service operations but also guarantees that you will be able to get the most out of your machine at any time.

The XSD160 is a very powerful, stable and sturdy unit that can be used as a mobile unit or a fixed one in any customized systems for production.

Combined to our computerized control panel (LS1) or to a dedicated RS232 interface through an interfacing box, it can be integrated in all kind of environment, can replace the majority of existing units without big changes or any, or can be installed as a single end unit, stationary or mobile (XMD).

  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 50mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • Safety first, X-ray start with 2 buttons
  • Low consumption
  • Very reliable
  • Powerful, steadiness & sturdiness
  • Solid insulation HV module : more convenient for the maintenance 
  • No gas and no oil to isolate
  • Can be turned into panoramic or directional x-ray equipment
  • Can drive up to two individual filament
  • Can be combined to a RS232 interface
  • CANON military metallic connectors
  • Oil & Gas
  • Energy
  • Aeronautical / aerospace
  • Transport
  • Military
  • Bio-medical & agriculture
  • And much more
SpecificationsUnitsXSD160/4KW
High voltage rangekV5 to 160
Tube current rangemA0,1 to 50
Focal spot size (IEC336)From 0,2 x 0,2 to 3 x 3
Ripple0,1% PP
Maximum output powerWatt4000
FrequencyHz47 - 63
CurrentA18
Steel penetration at max (*)mm35
Working temperature°C0 to 45°C
Anode cooling typeWater
pe Duty cycle%100%
InsulationEncapsulated
VoltageV230 (-15% +10%)
WeightKg68
TubeheadMetal-Ceramic
Control unitLS1

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltograph

XSD225

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The XSD225/4KW is probably the best compromise in power and size for medium thickness applications. Completely renewed during summer 2014, it keeps all previsous features but has been made with the lastest available components, reduced in size, weight and the most important, is more powerfull, offering 4000W. Able to be operated as down as 5 kV where you will use it for composite and light alloys applications, at full power, you will be able to get radiographies of medium walled steel castings with incomparable qualities.

The XSD225/4KW is a very powerful, stable and sturdy unit that can be used as a mobile unit or as a fi xed one in any customized systems for production. A very large variety of tubeheads is available and the unit can then be easily turned into a Panoramic or a Directional X-ray equipment.

Combined to our computerized control panel (LS1 series), it can be integrated in any environment, can replace the majority of existing units without big changes or any, or can be installed as a single end unit, stationary or mobile (XMD).

  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Output power up to 4000W
  • Current up to 30mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • Safety first, X-ray start with 2 buttons
  • Low consumption
  • Very reliable
  • Powerful, steadiness & sturdiness
  • Solid insulation HV module : more convenient for the maintenance 
  • No gas and no oil to isolate
  • Can be turned into panoramic or directional x-ray equipment
  • Can drive up to two individual filament
  • Can be combined to a RS232 interface
  • CANON military metallic connectors
  • Oil & Gas
  • Energy
  • Aeronautical / aerospace
  • Transport
  • Military
  • Bio-medical & agriculture
  • And much more
SpecificationsUnitsXSD225/4KW
High voltage rangekV5 - 225
Tube current rangemA0,1 - 30
Focal spot size (IEC336)From 0,2 x 0,2 to 3 x 3
Ripple0,1% PP
Maximum output powerWatt4000
FrequencyHz47 - 63
CurrentA18
Steel penetration at max (*)mm54
Working temperature°C0 to 45°C
Anode cooling typeWater
Duty cycle%100%
InsulationEncapsulated
VoltageV230 (-15% +10%)
WeightKg109
TubeheadMetal-Ceramic
Control unitLS1

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltograph

XSD320

  • Product description
  • Main features
  • Key advantages
  • Most common applications

XSD320 is the fi rst bipolar unit of the Baltograph series. Made up of two 160 kV unit (Cathodic + Anodic), it uses the same modules as the monopolar unit and can consist in an upgrade of an existing monopolar unit from the XSD series.

Completely renewed during summer 2014, it keeps all previsous features but has been made with the lastest available components, reduced in size, weight and the most important, is more powerfull, offering 4000W.

This unit is mostly designed for high absorbing material where a very high or very reduced exposure time is necessary.

Extremely simple to install and to connect, it could also be used as a mobile unit for specific applications.

Combined to our computerized control panel (LS1 series), it can be integrated in any environment, can replace the majority of existing units without big changes or any, or can be installed as a single end unit.

  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 30mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • Safety first, X-ray start with 2 buttons
  • Low consumption
  • Very reliable
  • Powerful, steadiness & sturdiness
  • Solid insulation HV module : more convenient for the maintenance 
  • No gas and no oil to isolate
  • Can be turned into panoramic or directional x-ray equipment
  • Can drive up to two individual filament
  • Can be combined to a RS232 interface
  • CANON military metallic connectors
  • Oil & Gas
  • Energy
  • Aeronautical / aerospace
  • Transport
  • Military
  • Bio-medical & agriculture
  • And much more
SpecificationsUnitsXSD320/4,5KW
High voltage rangekV5 - 320
Tube current rangemA0,1 - 30
Focal spot size (IEC336)From 0,8 x 0,8 to 3 x 3
Ripple0,1% PP
Maximum output powerWatt4500
FrequencyHz47 - 63
CurrentA22
Steel penetration at max (*)mm76
Working temperature°C0 to 45°C
Anode cooling typeOil
Duty cycle%100%
InsulationEncapsulated
VoltageV230 (-15% +10%)
WeightKg136
TubeheadMetal-Ceramic
Control unitLS1

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltograph

XSD450

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The top of the series in terms of power and penetration, the XSD450 is a bipolar unit of the BALTOGRAPH series. Made up of two 225 kV unit (Cathodic + Anodic), it uses the same modules as the monopolar unit and can consist in an upgrade of an existing monopolar unit from the XSD series. Completely renewed during summer 2014, it keeps all previsous features but has been made with the lastest available components, reduced in size, weight, etc.

Dedicated to heavy walled applications that deserve both a high power and a high penetration, this unit makes no compromises to quality. With our very stable HV generator block, the output will fi t into any of your applications and detectors types. Various tubeheads can be connected and our specialists will help you in defining which is the most adapted to your applications.

Combined to our computerized control panel (LS1 series), it can be integrated in any environment, can replace the majority of existing units without big changes or any, or can be installed as a single end unit.

  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Output power 4500W
  • Current up to 30mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • Safety first, X-ray start with 2 buttons
  • Low consumption
  • Very reliable
  • Powerful, steadiness & sturdiness
  • Solid insulation HV module : more convenient for the maintenance 
  • No gas and no oil to isolate
  • Can be turned into panoramic or directional x-ray equipment
  • Can drive up to two individual filament
  • Can be combined to a RS232 interface
  • CANON military metallic connectors
  • Oil & Gas
  • Energy
  • Aeronautical / aerospace
  • Transport
  • Military
  • Bio-medical & agriculture
  • And much more
SpecificationsUnitsXSD450/4.5KW
High voltage rangekV5 - 450
Tube current rangemA0,1 - 30
Focal spot size (IEC336)From 0,8 x 0,8 to 3,5 x 3,5
Ripple0,1% PP
Maximum output powerWatt4500
FrequencyHz47 - 63
CurrentA25
Steel penetration at max (*)mm104
Working temperature°C0 to 45°C
Anode cooling typeOil
Duty cycle%100%
InsulationEncapsulated
VoltageV230 (-15% +10%)
WeightKg218
TubeheadMetal-Ceramic
Control unitLS1

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltograph

LS1

  • Product description
  • Characteristics
  • Key advantages

LS1 is a micro processor based unit able to drive any generators of the Baltograph® series. From 100kv units to 450 kV, stationary or mobile, the same control unit can be used and will automatically recognize, Units and tubes connected.

An innovative and evolutive embedded software made by Radiographers with downloadable additional features, is the brain of all operations.

The Large TFT colour screen enclosed into the front cover is foldable and well readable by changing the inclination to your convenience.

Working status can visually be checked at all time as the main indicators are outside of the cover area. Very compact and lightweight the LS1 is designed to be used with either a mobile or stationary unit. A system version also exists to be integrated in cabinets and electrical enclosures.

  • Unique control unit

  • Micro-processor able to drive any generators of the Baltograph series

  • Large internal memory
  • Load curves of the tube connected
  • Operating manual fully integrated with display via the HELP function
  • Large TFT colour screen
  • Compact, lightweight
  • A system version exists
  • Interactive exposure charts to determine shooting parameters

  • Define the load curve of a new X-ray tube

  • Unsharpness geometric calculation
  • Possibility to work in « scopie mode »
  • kV & mA adjustable in real time 
  • I/O configurable by the user to launch actions in function external events
  • Troubleshooting
  • Record the results on an external USB
  • Ability to update the software via an USB
SpecificationsUnitsLS1
MainsV90 - 245
FrequencyHz45 - 66
Measure of kV and mATrue measure
LED display and safety device3 positions key switch: Mains ON - X-ray ON - Prewarning
LED display and safety deviceEmergency stop - Buzzer for audible warning
Main screenSelection mode, settings and controls
kV stepkV1 - 2- 5
mA stepmA0,1 - 0,2 - 0,5
Memories10000 with users directories
ModesStandard user, Supervisor, SAV (maintenance and service)
Misc.Multiple tubeheads database management, built in Help & operating
Misc.manual, Exposure curves, Database option, Intelligent preheating, etc.
Generator connectionSub-D26
Device connection1 x USB 2.0
4 confi gurable and programmable I/OSub-D9
Operating temperature°C+5° to +50°
ProtectionIP54
WeightKg4,8
CasingAluminium

Baltograph

LS1C2

  • Product description
  • Characteristics
  • Key advantages

The evolution of our LS1C, the LS1C2 is the ultimate rackable version for systems uses. This version is delivered with its control protocol which includes all commands to set up and perform X-ray exposures.

The LS1C2 works with the well known « X-ray Remote Control » software under Windows 7 64 bits, which allows you to manage from the preparation (preheating, modes, etc…) to the X-ray exposure.

TCP/IP type commands are provided for custom / OEM oriented applications.

All the features developed on the standard LS1 such as the automatic recognition of Baltograph generators, automatic preheating, TSC/TSD tubeheads recongnition, diagnostic and maintenance modes are standard.

  • Rackable unit of our LS1 control unit

  • Embedded security such as emergency stop, security loops, 3 positions key switch, etc.

  • X-ray remote control software from the Baltoscope Inspection Suite
  • 19’’ rack metallic casing

  • Large emergency switch

  • LED light for unit status
  • 3 positions key for maximum safety
  • Embedded watch dog
  • Delivered with X-Ray Remote Control (XRRC) software
SpecificationsUnitsLS1C2
MainsV90 - 245
FrequencyHz45 - 66
Measure of kV and mATrue measure
LED display and safety device3 positions key switch: Mains ON - X-ray ON - Prewarning
LED display and safety deviceEmergency stop - Buzzer for audible warning
Main screenSelection mode, settings and controls
kV stepkV1 - 2- 5
mA stepmA0,1 - 0,2 - 0,5
Memories10000 with users directories
ModesStandard user, Supervisor, SAV (maintenance and service)
Misc.Multiple tubeheads database management, built in Help & operating
Misc.manual, Exposure curves, Database option, Intelligent preheating, etc.
Generator connectionSub-D26
Device connection1 x USB 2.0
4 confi gurable and programmable I/OSub-D9
Operating temperature°C+5° to +50°
ProtectionIP54
WeightKg4,8
CasingAluminium

Baltograph

WCU3000

  • Product description
  • Works with

It is an essential device which role is to cool the anode of the tubehead when X-rays are produced.

Units are compact and powerful to assure both the cooling capacity and the sufficient flow rate to quickly remove calories from the anode.

  • XSD Series
  • XMD Series
  • XLD Series
SpecificationsUnitsWCU3000
Dimensions (L x W x H)mm442 x 398 x 446
Weight (without filling)kg38,5
Coolant capacityl3,7
Cooling capacityW3000
Water flow (at 6.0 bar)l/min6
Mains voltageV230 (50/60Hz)
Current consumptionA2,5
Noise leveldB(A)55 (50Hz) / 59 (60Hz) distance 1m in any direction
Operating temperature°CFrom + 5° to + 40°
Air flowm³/h1200
Storage temperature°CFrom - 25° to + 70°
Air humidity%From + 20 to + 80
Maximum forward pressurebar8 (+/-5)
Flow switch openl/min+/- 4
Thermal switch open°C55

Baltograph

OACU4500

  • Product description
  • Works with

Oil Air Cooling Unit : It is an essential device which role is to cool the anode of the tubehead when X-rays are produced.
Units are compact and powerful to assure both the cooling capacity and the sufficient fl ow rate to quickly remove calories from the anode.

  • XSD Series (Bi-polar generators)
SpecificationsUnitsOACU4500
Dimensions (L x W x H)mm750 x 350 x 650
Weight (without filling)kg54
Coolant capacityl23
Cooling capacityW4500
Water flow (at 6.0 bar)l/min> 23
Mains voltageV230 (50/60Hz)
Current consumptionA2,5
Noise leveldB(A)63 (50Hz) / 67 (60Hz)
Operating temperature°CFrom + 5° to + 40°
Air flowm³/h1200
Storage temperature°CFrom -10° to +40°
Air humidity%From -25° to +70°
Maximum forward pressurebar9,0 + 0,5 - 0,2
Flow switch openl/min17,0 +/-3
Thermal switch open°C55 +/-3