Loading

Baltograph

TSD320/2

  • Product description
  • Works with

The TSD320/2 is a compromise of power and small size filaments. If the need of power is lower than 1,6 kW, this tube will help you gaining definition in medium to heavy walled applications. Equipped with two independent filaments, this tube allows you to drive up to 1,6 kW on the large filament while the small size filament will give you enough power to perform the majority of higher definition applications even at 320 kV.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
SpecificationsUnitsTSD320/2 (Small focal / Large focal)
Max. High voltagekV320
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeOil
HV ConnectorR24
Nominal powerW640 / 1600
Inherent filtrationmm3 Be
Target angle°20°
Leakage*mSv/h@1m≤ 10
Cooling flow ratel/min.14
WeightKg40
Max. Current @ kV Max.mA2 / 5
Focal spot (EN12543)d1,9 / 3,6
Max. CurrentmA9 / 20

* Leakage radiation max at 1m in mSv/h at nominal kV

Baltograph

TSD320/0

  • Product description
  • Works with

The TSD320/0 is the first tube of the Bipolar range. This tube has a big amount of power available and is designed for medium to heavy walled steel thicknesses applications. Driven by the adequate generator it can also be used in light alloys and composites materials. With a power of up to 4 kW on the large filament this tube helps you reducing your film exposures durations or achieve superior thicknesses in reduced times. The second filament will provide an alternative for higher definition radiographies or radioscopic applications.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
SpecificationsUnitsTSD320/0 (Small focal / Large focal)
Max. High voltagekV320
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeOil
HV ConnectorR24
Nominal powerW1500 / 4200
Inherent filtrationmm3 Be
Target angle°20°
Leakage*mSv/h@1m5
Cooling flow ratel/min.14
WeightKg≤ 41
Max. Current @ kV Max.mA4,5 / 13
Focal spot (EN12543)d3 / 5,5
Max. CurrentmA15 / 30

* Leakage radiation max at 1m in mSv/h at nominal kV

Baltograph

XSD160

  • Product description
  • Main features
  • Key advantages
  • Most common applications

Introducing the Baltograph series, the XSD160 is the first unit of a complete set based on a solid insulation HV module.

Completely renewed during summer 2014, it keeps all previous features but has been made with the lastest available components, reduced in size, weight and the most important, is more powerfull, offering 4000W & up to 50 mA. This technology not only frees you from very specialized service operations but also guarantees that you will be able to get the most out of your machine at any time.

The XSD160 is a very powerful, stable and sturdy unit that can be used as a mobile unit or a fixed one in any customized systems for production.

Combined to our computerized control panel (LS1) or to a dedicated RS232 interface through an interfacing box, it can be integrated in all kind of environment, can replace the majority of existing units without big changes or any, or can be installed as a single end unit, stationary or mobile (XMD).

  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 50mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • Safety first, X-ray start with 2 buttons
  • Low consumption
  • Very reliable
  • Powerful, steadiness & sturdiness
  • Solid insulation HV module : more convenient for the maintenance 
  • No gas and no oil to isolate
  • Can be turned into panoramic or directional x-ray equipment
  • Can drive up to two individual filament
  • Can be combined to a RS232 interface
  • CANON military metallic connectors
  • Oil & Gas
  • Energy
  • Aeronautical / aerospace
  • Transport
  • Military
  • Bio-medical & agriculture
  • And much more
SpecificationsUnitsXSD160/4KW
High voltage rangekV5 to 160
Tube current rangemA0,1 to 50
Focal spot size (IEC336)From 0,2 x 0,2 to 3 x 3
Ripple0,1% PP
Maximum output powerWatt4000
FrequencyHz47 - 63
CurrentA18
Steel penetration at max (*)mm35
Working temperature°C0 to 45°C
Anode cooling typeWater
pe Duty cycle%100%
InsulationEncapsulated
VoltageV230 (-15% +10%)
WeightKg68
TubeheadMetal-Ceramic
Control unitLS1

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltograph

XSD225

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The XSD225/4KW is probably the best compromise in power and size for medium thickness applications. Completely renewed during summer 2014, it keeps all previsous features but has been made with the lastest available components, reduced in size, weight and the most important, is more powerfull, offering 4000W. Able to be operated as down as 5 kV where you will use it for composite and light alloys applications, at full power, you will be able to get radiographies of medium walled steel castings with incomparable qualities.

The XSD225/4KW is a very powerful, stable and sturdy unit that can be used as a mobile unit or as a fi xed one in any customized systems for production. A very large variety of tubeheads is available and the unit can then be easily turned into a Panoramic or a Directional X-ray equipment.

Combined to our computerized control panel (LS1 series), it can be integrated in any environment, can replace the majority of existing units without big changes or any, or can be installed as a single end unit, stationary or mobile (XMD).

  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Output power up to 4000W
  • Current up to 30mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • Safety first, X-ray start with 2 buttons
  • Low consumption
  • Very reliable
  • Powerful, steadiness & sturdiness
  • Solid insulation HV module : more convenient for the maintenance 
  • No gas and no oil to isolate
  • Can be turned into panoramic or directional x-ray equipment
  • Can drive up to two individual filament
  • Can be combined to a RS232 interface
  • CANON military metallic connectors
  • Oil & Gas
  • Energy
  • Aeronautical / aerospace
  • Transport
  • Military
  • Bio-medical & agriculture
  • And much more
SpecificationsUnitsXSD225/4KW
High voltage rangekV5 - 225
Tube current rangemA0,1 - 30
Focal spot size (IEC336)From 0,2 x 0,2 to 3 x 3
Ripple0,1% PP
Maximum output powerWatt4000
FrequencyHz47 - 63
CurrentA18
Steel penetration at max (*)mm54
Working temperature°C0 to 45°C
Anode cooling typeWater
Duty cycle%100%
InsulationEncapsulated
VoltageV230 (-15% +10%)
WeightKg109
TubeheadMetal-Ceramic
Control unitLS1

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltograph

XSD320

  • Product description
  • Main features
  • Key advantages
  • Most common applications

XSD320 is the fi rst bipolar unit of the Baltograph series. Made up of two 160 kV unit (Cathodic + Anodic), it uses the same modules as the monopolar unit and can consist in an upgrade of an existing monopolar unit from the XSD series.

Completely renewed during summer 2014, it keeps all previsous features but has been made with the lastest available components, reduced in size, weight and the most important, is more powerfull, offering 4000W.

This unit is mostly designed for high absorbing material where a very high or very reduced exposure time is necessary.

Extremely simple to install and to connect, it could also be used as a mobile unit for specific applications.

Combined to our computerized control panel (LS1 series), it can be integrated in any environment, can replace the majority of existing units without big changes or any, or can be installed as a single end unit.

  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 30mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • Safety first, X-ray start with 2 buttons
  • Low consumption
  • Very reliable
  • Powerful, steadiness & sturdiness
  • Solid insulation HV module : more convenient for the maintenance 
  • No gas and no oil to isolate
  • Can be turned into panoramic or directional x-ray equipment
  • Can drive up to two individual filament
  • Can be combined to a RS232 interface
  • CANON military metallic connectors
  • Oil & Gas
  • Energy
  • Aeronautical / aerospace
  • Transport
  • Military
  • Bio-medical & agriculture
  • And much more
SpecificationsUnitsXSD320/4,5KW
High voltage rangekV5 - 320
Tube current rangemA0,1 - 30
Focal spot size (IEC336)From 0,8 x 0,8 to 3 x 3
Ripple0,1% PP
Maximum output powerWatt4500
FrequencyHz47 - 63
CurrentA22
Steel penetration at max (*)mm76
Working temperature°C0 to 45°C
Anode cooling typeOil
Duty cycle%100%
InsulationEncapsulated
VoltageV230 (-15% +10%)
WeightKg136
TubeheadMetal-Ceramic
Control unitLS1

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltograph

XSD450

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The top of the series in terms of power and penetration, the XSD450 is a bipolar unit of the BALTOGRAPH series. Made up of two 225 kV unit (Cathodic + Anodic), it uses the same modules as the monopolar unit and can consist in an upgrade of an existing monopolar unit from the XSD series. Completely renewed during summer 2014, it keeps all previsous features but has been made with the lastest available components, reduced in size, weight, etc.

Dedicated to heavy walled applications that deserve both a high power and a high penetration, this unit makes no compromises to quality. With our very stable HV generator block, the output will fi t into any of your applications and detectors types. Various tubeheads can be connected and our specialists will help you in defining which is the most adapted to your applications.

Combined to our computerized control panel (LS1 series), it can be integrated in any environment, can replace the majority of existing units without big changes or any, or can be installed as a single end unit.

  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Output power 4500W
  • Current up to 30mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • Safety first, X-ray start with 2 buttons
  • Low consumption
  • Very reliable
  • Powerful, steadiness & sturdiness
  • Solid insulation HV module : more convenient for the maintenance 
  • No gas and no oil to isolate
  • Can be turned into panoramic or directional x-ray equipment
  • Can drive up to two individual filament
  • Can be combined to a RS232 interface
  • CANON military metallic connectors
  • Oil & Gas
  • Energy
  • Aeronautical / aerospace
  • Transport
  • Military
  • Bio-medical & agriculture
  • And much more
SpecificationsUnitsXSD450/4.5KW
High voltage rangekV5 - 450
Tube current rangemA0,1 - 30
Focal spot size (IEC336)From 0,8 x 0,8 to 3,5 x 3,5
Ripple0,1% PP
Maximum output powerWatt4500
FrequencyHz47 - 63
CurrentA25
Steel penetration at max (*)mm104
Working temperature°C0 to 45°C
Anode cooling typeOil
Duty cycle%100%
InsulationEncapsulated
VoltageV230 (-15% +10%)
WeightKg218
TubeheadMetal-Ceramic
Control unitLS1

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltograph

XLD100

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The XLD100 is a 100kV constant potential generator, direct evolution of our well known CLD100. It has been specially designed and optimized for real time applications and offers an extremely high dose stability to produce quality images comparable to conventional X-ray films.

Lightweight and highly flexible, that makes it the ideal selection for all castings and medium walled steels.

Equipped with the RC8 or the XLP, the XLD100 will be very easy to use. Both control mode are delivered with the X-Ray Remote Control (XRRC) software.

The Baltograph XLD100 is a user friendly X-ray examination system. With accessories such as fl at panels and Image Processing Software, this is the perfect digital solution.

  • Latest generation technologies
  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 12mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • RS232 interface for computer connection
  • Powerful, steadiness & sturdiness
  • SF6 insulation HV module
  • No oil insulation for hassle free maintenance
  • Can be used with panoramic or directional x-ray tubes
  • Can drive two individual filament
  • Tyre inspection application
  • Casting / Welding inspection
  • Security
  • Digital applications
  • Aeronautical / aerospace / Transport
  • Food inspection
  • Military
  • Bio-medical & agriculture
SpecificationsUnitsXLD100
High voltage rangekV10 - 100
Tube current rangemA0,5 - 12
Tube rangekVUp to 100
Ripple0,1% PP
Maximum output powerWatt650 or 1000
FrequencyHz47 - 63
Drive frequencyKHz30
Operating temperature°C0 to 50°C
Output connectorR10
Duty cycle%100
InsulationSF6
VoltageV230 (-15% +10%)
WeightKg16,6
TubeheadBalteau NDT and compatible with all leading manufacturers
Control mode:Hand-XD or XLP

Baltograph

XLD160

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The XLD160 is a 160kV constant potential generator, direct evolution of our well known CLD160. It has been specially designed and optimized for real time applications and offers an extremely high dose stability to produce quality images comparable to conventional X-ray fi lms.

Lightweight and highly flexible, that makes it the ideal selection for all castings and medium walled steels.

Equipped with the RC8 or the XLP, the XLD160 will be very easy to use. Both control mode are delivered with the X-Ray Remote Control (XRRC) software.

The Baltograph XLD160 is a user friendly X-ray examination system. With accessories such as fl at panels and Image Processing Software, this is the perfect digital solution.

  • Latest generation technologies
  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 12mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • RS232 interface for computer connection
  • Powerful, steadiness & sturdiness
  • SF6 insulation HV mode
  • No oil insulation for hassle free maintenance
  • Can be used with panoramic or directional x-ray tubes
  • Can drive two individual filament
  • Tyre inspection applications
  • Casting / Welding inspection
  • Security
  • Digital applications
  • Aeronautical / aerospace / Transport
  • Food inspection
  • Military
  • Bio-medical & agriculture
SpecificationsUnitsXLD160
High voltage rangekV10 - 160
Tube current rangemA0,5 - 12
Tube rangekVUp to 160
Ripple0,1% PP
Maximum output powerWatt650 or 1000
FrequencyHz47 - 63
Drive frequencyKHz30
Operating temperature°C0 to 50°C
Output connectorR24
Duty cycle%100%
InsulationSF6
VoltageV230 (-15% +10%)
WeightKg16,6
TubeheadMetal-Ceramic
Control modeHand-XD or XLP

Baltograph

XLD225

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The XLD225 is a 225kV constant potential generator, direct evolution of our well known CLD Series. It has been specially designed and optimized for real time applications and offers an extremely high dose stability to produce quality images comparable to conventional X-ray films.

Lightweight and highly flexible, that makes it the ideal selection for all castings and medium walled steels.

Equipped with the RC8 or the XLP, the XLD225 will be very easy to use. Both control mode are delivered with the X-Ray Remote Control (XRRC) software.

The Baltograph XLD225 is a user friendly X-ray examination system. With accessories such as fl at panels and Image Processing Software, this is the perfect digital solution.

  • Latest generation technologies
  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 12mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • RS232 interface for computer connection
  • Powerful, steadiness & studiness
  • SF6 insulation HV module
  • No oil insulation for hassle free maintenance
  • Can be used with panoramic or directional x-ray tubes
  • Can drive two individual filament
  • Tyre inspection applications
  • Casting / Welding inspection
  • Security
  • Digital applications
  • Aeronautical / aerospace / Transport
  • Food inspection
  • Military
  • Bio-medical & agriculture
SpecificationsUnitsXLD225
High voltage rangekV10 - 225
Tube current rangemA0,5 - 12
Tube rangekVUp to 225
Ripple0,1% PP
Maximum output powerWatt650 or 1000
FrequencyHz47 - 63
Drive frequencyKHz30
Operating temperature°C0 to 50°C
Output connectorR24
Duty cycle%100%
InsulationSF6
VoltageV230 (-15% +10%)
WeightKg16,6
TubeheadMetal-Ceramic
Control modeHand-XD or XLP

Baltograph

XMD160

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The XMD160/4KW gives the flexibility of a mobile unit and and is as powerful, stable and sturdy as a stationary unit. It gives you more flexibility than a portable unit in places where room for the tubehead is reduced.

The XMD160/4KW is the mobile version of the XSD160/4KW, first unit of a complete set based on a solid insulation HV module. This technology not only frees you from very specialized service operations but also guarantees that you will be able to get the most out of your machine at any time.

A very high duty cycle and a wide variety of tubehead is available, therefore the unit can be easily turned into a Panoramic or a Directional X-ray equipment with different focal spot sizes and can drive up to two individual filaments.

Combined to our computerized control panel (LS1) it can be integrated in all kind of environment, for instance it can replace the majority of existing units without big changes or any.

  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 50mA
  • Output power up to 4000 W
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • Safety first, X-ray start with 2 buttons
  • Low consumption
  • Very reliable
  • Powerful, steadiness & sturdiness
  • Solid insulation HV module : more convenient for the maintenance 
  • No gas and no oil to isolate
  • Can be turned into panoramic or directional x-ray equipment
  • Can drive two individual filament
  • Can be combined to a RS232 interface
  • CANON military metallic connectors
  • Oil & Gas
  • Energy
  • Aeronautical / aerospace
  • Transport
  • Military
  • Bio-medical & agriculture
  • And much more
SpecificationsUnitsXMD160/4KW
High voltage rangekV5 - 160
Tube current rangemA0,1 - 50
Focal spot size (EN12543)From 0,4 to 5,5
Ripple0,1% PP
Maximum output powerWatt4000
FrequencyHz47 - 63
CurrentA18
Steel penetration at max (*)mm35
Working temperature°C0 to 45°C
Anode cooling typeWater
Duty cycle%100
InsulationEncapsulated
VoltageV230 (-15% +10%)
WeightKg185
TubeheadMetal-Ceramic
Control unitLS1

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltograph

XMD225

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The XMD225/4KW gives the flexibility of a mobile unit and and is as powerful, stable and sturdy as a stationary unit. It gives you more flexibility than a portable unit in places where room for the tubehead is reduced.

The XMD225/4KW is the mobile version of the XSD225/4KW, first unit of a complete set based on a solid insulation HV module. This technology not only frees you from very specialized service operations but also guarantees that you will be able to get the most out of your machine at any time.

A very high duty cycle and a wide variety of tubehead is available, therefore the unit can be easily turned into a Panoramic or a Directional X-ray equipment with different focal spot sizes and can drive up to two individual filaments.

Combined to our computerized control panel (LS1) it can be integrated in all kind of environment, for instance it can replace the majority of existing units without big changes or any.

  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 30mA
  • Output power up to 4000 W
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • Safety first, X-ray start with 2 buttons
  • Low consumption
  • Very reliable
  • Powerful, steadiness & sturdiness
  • Solid insulation HV module : more convenient for the maintenance 
  • No gas and no oil to isolate
  • Can be turned into panoramic or directional x-ray equipment
  • Can drive two individual filament
  • Can be combined to a RS232 interface
  • CANON military metallic connectors
  • Oil & Gas
  • Energy
  • Aeronautical / aerospace
  • Transport
  • Military
  • Bio-medical & agriculture
  • And much more
SpecificationsUnitsXMD225/4KW
High voltage rangekV5 - 225
Tube current rangemA0,1 - 30
Focal spot size (EN12543)From 0,4 to 5,5
Ripple0,1% PP
Maximum output powerWatt4000
FrequencyHz47 - 63
CurrentA18
Steel penetration at max (*)mm54
Working temperature°C0 to 45°C
Anode cooling typeWater
Duty cycle%100%
InsulationEncapsulated
VoltageV230 (-15% +10%)
WeightKg244
TubeheadMetal-Ceramic
Control unitLS1

* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.

Baltograph

LS1

  • Product description
  • Characteristics
  • Key advantages

LS1 is a micro processor based unit able to drive any generators of the Baltograph® series. From 100kv units to 450 kV, stationary or mobile, the same control unit can be used and will automatically recognize, Units and tubes connected.

An innovative and evolutive embedded software made by Radiographers with downloadable additional features, is the brain of all operations.

The Large TFT colour screen enclosed into the front cover is foldable and well readable by changing the inclination to your convenience.

Working status can visually be checked at all time as the main indicators are outside of the cover area. Very compact and lightweight the LS1 is designed to be used with either a mobile or stationary unit. A system version also exists to be integrated in cabinets and electrical enclosures.

  • Unique control unit

  • Micro-processor able to drive any generators of the Baltograph series

  • Large internal memory
  • Load curves of the tube connected
  • Operating manual fully integrated with display via the HELP function
  • Large TFT colour screen
  • Compact, lightweight
  • A system version exists
  • Interactive exposure charts to determine shooting parameters

  • Define the load curve of a new X-ray tube

  • Unsharpness geometric calculation
  • Possibility to work in « scopie mode »
  • kV & mA adjustable in real time 
  • I/O configurable by the user to launch actions in function external events
  • Troubleshooting
  • Record the results on an external USB
  • Ability to update the software via an USB
SpecificationsUnitsLS1
MainsV90 - 245
FrequencyHz45 - 66
Measure of kV and mATrue measure
LED display and safety device3 positions key switch: Mains ON - X-ray ON - Prewarning
LED display and safety deviceEmergency stop - Buzzer for audible warning
Main screenSelection mode, settings and controls
kV stepkV1 - 2- 5
mA stepmA0,1 - 0,2 - 0,5
Memories10000 with users directories
ModesStandard user, Supervisor, SAV (maintenance and service)
Misc.Multiple tubeheads database management, built in Help & operating
Misc.manual, Exposure curves, Database option, Intelligent preheating, etc.
Generator connectionSub-D26
Device connection1 x USB 2.0
4 confi gurable and programmable I/OSub-D9
Operating temperature°C+5° to +50°
ProtectionIP54
WeightKg4,8
CasingAluminium

Baltograph

LS1C2

  • Product description
  • Characteristics
  • Key advantages

The evolution of our LS1C, the LS1C2 is the ultimate rackable version for systems uses. This version is delivered with its control protocol which includes all commands to set up and perform X-ray exposures.

The LS1C2 works with the well known « X-ray Remote Control » software under Windows 7 64 bits, which allows you to manage from the preparation (preheating, modes, etc…) to the X-ray exposure.

TCP/IP type commands are provided for custom / OEM oriented applications.

All the features developed on the standard LS1 such as the automatic recognition of Baltograph generators, automatic preheating, TSC/TSD tubeheads recongnition, diagnostic and maintenance modes are standard.

  • Rackable unit of our LS1 control unit

  • Embedded security such as emergency stop, security loops, 3 positions key switch, etc.

  • X-ray remote control software from the Baltoscope Inspection Suite
  • 19’’ rack metallic casing

  • Large emergency switch

  • LED light for unit status
  • 3 positions key for maximum safety
  • Embedded watch dog
  • Delivered with X-Ray Remote Control (XRRC) software
SpecificationsUnitsLS1C2
MainsV90 - 245
FrequencyHz45 - 66
Measure of kV and mATrue measure
LED display and safety device3 positions key switch: Mains ON - X-ray ON - Prewarning
LED display and safety deviceEmergency stop - Buzzer for audible warning
Main screenSelection mode, settings and controls
kV stepkV1 - 2- 5
mA stepmA0,1 - 0,2 - 0,5
Memories10000 with users directories
ModesStandard user, Supervisor, SAV (maintenance and service)
Misc.Multiple tubeheads database management, built in Help & operating
Misc.manual, Exposure curves, Database option, Intelligent preheating, etc.
Generator connectionSub-D26
Device connection1 x USB 2.0
4 confi gurable and programmable I/OSub-D9
Operating temperature°C+5° to +50°
ProtectionIP54
WeightKg4,8
CasingAluminium

Baltograph

XLMD160

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The XLMD160 is a mobile version of our XLD160 generator offering the flexibility of a mobile unit but as stable and sturdy as a stationary unit. It also gives you more flexibility than a portable unit in places where room for the tubehead is reduced. It has been specially designed and optimized for real time applications and offers an extremely high dose stability to produce quality images comparable to conventional X-ray films. A very high duty cycle and a wide variety of tubehead is available, therefore the unit can be easily turned into a Panoramic or a Directional X-ray equipment with different focal spot sizes and can drive up to two individual filaments. Lightweight and highly flexible, that makes it the ideal selection for all castings and medium walled steels. Equipped with the HAND-XD or the DC1, the XLD160 is very easy to use and can also be driven by the X-Ray Remote Control (XRRC) software.

  • Latest generation technologies
  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 12mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • RS232 interface for computer connection
  • Powerful, steadiness & sturdiness
  • SF6 insulation HV mode
  • No oil insulation for hassle free maintenance
  • Can be used with panoramic or directional x-ray tubes
  • Can drive two individual filament
  • Casting / Welding inspection
  • Digital applications
  • Aeronautical / aerospace / Transport
  • Military
  • Bio-medical & agriculture
SpecificationsUnitsXLMD160
High voltage rangekV10 - 160
Tube current rangemA0,5 - 12
Tube rangekVUp to 160
Ripple0,1% PP
Maximum output powerWatt650 or 1000
FrequencyHz47 - 63
Drive frequencyKHz30
Operating temperature°C0 to 50°C
Output connectorR24
Duty cycle%100%
InsulationSF6
VoltageV230 (-15% +10%)
WeightKg137
TubeheadMetal-Ceramic
Control modeHAND-XD or DC1/B

Baltograph

XLMD225

  • Product description
  • Main features
  • Key advantages
  • Most common applications

The XLMD225 is a mobile version of our XLD225 generator offering the flexibility of a mobile unit but as stable and sturdy as a stationary unit. It also gives you more flexibility than a portable unit in places where room for the tubehead is reduced. It has been specially designed and optimized for real time applications and offers an extremely high dose stability to produce quality images comparable to conventional X-ray films. A very high duty cycle and a wide variety of tubehead is available, therefore the unit can be easily turned into a Panoramic or a Directional X-ray equipment with different focal spot sizes and can drive up to two individual filaments. Lightweight and highly flexible, that makes it the ideal selection for all castings and medium walled steels. Equipped with the HAND-XD or the DC1, the XLD225 is very easy to use and can also be driven by the X-Ray Remote Control (XRRC) software.

  • Latest generation technologies
  • High frequency constant potential generator
  • "Ripple free"
  • High duty cycle
  • Current up to 12mA
  • Metal-ceramic tube
  • Stationary or mobile unit
  • Full automatic preheating
  • Very stable output
  • RS232 interface for computer connection
  • Powerful, steadiness & sturdiness
  • SF6 insulation HV mode
  • No oil insulation for hassle free maintenance
  • Can be used with panoramic or directional x-ray tubes
  • Can drive two individual filament
  • Casting / Welding inspection
  • Digital applications
  • Aeronautical / aerospace / Transport
  • Military
  • Bio-medical & agriculture
SpecificationsUnitsXLMD225
High voltage rangekV10 - 225
Tube current rangemA0,5 - 12
Tube rangekVUp to 225
Ripple0,1% PP
Maximum output powerWatt650 or 1000
FrequencyHz47 - 63
Drive frequencyKHz30
Operating temperature°C0 to 50°C
Output connectorR24
Duty cycle%100%
InsulationSF6
VoltageV230 (-15% +10%)
WeightKg142
TubeheadMetal-Ceramic
Control modeHand-XD or DC1/B

Baltograph

WCU3000

  • Product description
  • Works with

It is an essential device which role is to cool the anode of the tubehead when X-rays are produced.

Units are compact and powerful to assure both the cooling capacity and the sufficient flow rate to quickly remove calories from the anode.

  • XSD Series
  • XMD Series
  • XLD Series
SpecificationsUnitsWCU3000
Dimensions (L x W x H)mm442 x 398 x 446
Weight (without filling)kg38,5
Coolant capacityl3,7
Cooling capacityW3000
Water flow (at 6.0 bar)l/min6
Mains voltageV230 (50/60Hz)
Current consumptionA2,5
Noise leveldB(A)55 (50Hz) / 59 (60Hz) distance 1m in any direction
Operating temperature°CFrom + 5° to + 40°
Air flowm³/h1200
Storage temperature°CFrom - 25° to + 70°
Air humidity%From + 20 to + 80
Maximum forward pressurebar8 (+/-5)
Flow switch openl/min+/- 4
Thermal switch open°C55

Baltograph

OACU4500

  • Product description
  • Works with

Oil Air Cooling Unit : It is an essential device which role is to cool the anode of the tubehead when X-rays are produced.
Units are compact and powerful to assure both the cooling capacity and the sufficient fl ow rate to quickly remove calories from the anode.

  • XSD Series (Bi-polar generators)
SpecificationsUnitsOACU4500
Dimensions (L x W x H)mm750 x 350 x 650
Weight (without filling)kg54
Coolant capacityl23
Cooling capacityW4500
Water flow (at 6.0 bar)l/min> 23
Mains voltageV230 (50/60Hz)
Current consumptionA2,5
Noise leveldB(A)63 (50Hz) / 67 (60Hz)
Operating temperature°CFrom + 5° to + 40°
Air flowm³/h1200
Storage temperature°CFrom -10° to +40°
Air humidity%From -25° to +70°
Maximum forward pressurebar9,0 + 0,5 - 0,2
Flow switch openl/min17,0 +/-3
Thermal switch open°C55 +/-3

Baltograph

TSC200/0

  • Product description
  • Works with

The TSC200/0 is a panoramic monopolar tube specifically developped by Balteau NDT. Designed for the inspection of pneumatic, tank or all other hollow components. This tube is particulary suitable for applications using optical magnification, for light material, for small to medium thicknesses or even for the radioscopy.

The maximum outside diameter of the shaft makes hardly 150mm. The tube can thus be used in restricted spaces. The HV cable maybe either angled, or straight with an R24 standard connector.

This tube can be used with all brands of generators provided that their load curves can be adapted. Contact our specialists for more information.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSC200/0
Max. High voltagekV200
Tube typeMetal Ceramic
Beam angle°360° x 40°
Cooling modeWater
HV ConnectorR24
Nominal powerW600
Inherent filtrationmm0,4 Fe/Ni/Co
Target angle°22°
Cooling flow ratel/min.4
WeightKg13
Max. Current @ kV Max.mA3
Focal spot (EN12543)d4 x 0,4
Max. CurrentmA10

Baltograph

TSD225/0

  • Product description
  • Works with

The TSD225/0 is the highest capacity Monopolar tube of our range. It is designed to be used on light alloys, composites or medium steel thicknesses. One large filament can be used for high power applications (3 kW) and high dose demanding applications while the small focus will be ideal for high definition radiographies at reduced distances. The TSD225/0 is generally highly sufficient for the majority of standard industrial applications and is giving the advantage of still being Monopolar.

Slightly larger than a 160 tube, the housing diameter is only 124 mm which will ensure that the tube can still be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSD225/0 (Small focal / Large focal)
Max. High voltagekV225
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeWater
HV ConnectorR24
Nominal powerW640 / 3000
Inherent filtrationmm0,8 Be
Target angle°20°
Leakage*mSv/h@1m10
Cooling flow ratel/min.4
WeightKg11
Max. Current @ kV Max.mA2,8 / 13
Focal spot (EN12543)d1 / 5,5
Max. CurrentmA15 / 30

* Leakage radiation max at 1m in mSv/h at nominal kV

Baltograph

TSD225/1

  • Product description
  • Works with

The TSD225/1 is a compromise between high and low power at 225 kV which allows you a wide range of applications from light alloys and plastics to medium walled steel products. Focal spot sizes are offering the possibility to operate either in standard radiography or in radioscopic applications. The small size filament is also allowing applications with slight magnifications. The TSD225/1 is generally highly sufficient for the majority of standard industrial applications and is giving the advantage of still being Monopolar.

Slightly larger than a 160 tube, the housing diameter is only 124 mm which will ensure that the tube can still be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSD225/1 (Small focal / Large focal)
Max. High voltagekV225
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeWater
HV ConnectorR24
Nominal powerW640 / 1600
Inherent filtrationmm0,8 Be
Target angle°20°
Leakage*mSv/h@1m10
Cooling flow ratel/min.4
WeightKg11
Max. Current @ kV Max.mA3 / 7
Focal spot (EN12543)d1 / 3
Max. CurrentmA15 / 30

* Leakage radiation max at 1m in mSv/h at nominal kV

Baltograph

TSD225/3

  • Product description
  • Works with

The TSD225/3 is a very small focus dual filament monopolar tube for light alloys, composites or small steel thicknesses. The extremely small size of the small filament is designed for applications with magnifications or where definition is of first importance. This tube can be the ideal replacement of a µ Focus solution if the dose output of the µ Focus is not sufficient to cancel the natural noise of X-ray photons. This tube is perfectly adapted to Radioscopy applications or low power generators.

Slightly larger than a 160 tube, the housing diameter is only 124 mm which will ensure that the tube can still be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSD225/3 (Small focal / Large focal)
Max. High voltagekV225
Tube typeMetal Ceramic
Beam angle°40° x 30°
Cooling modeWater
HV ConnectorR24
Nominal powerW800 / 1800
Inherent filtrationmm0,8 Be
Target angle°11°
Leakage*mSv/h@1m10
Cooling flow ratel/min.4
WeightKg11
Max. Current @ kV Max.mA3,5 / 8
Focal spot (EN12543)d0,4** / 1
Max. CurrentmA14,5 / 30

* Leakage radiation max at 1m in mSv/h at nominal kV

** 30% Threshold

Baltograph

TSD225/4

  • Product description
  • Works with

The TSD225/4 is a compromise between high and low power at 225 kV which allows you a wide range of applications from light alloys and plastics to medium walled steel products. Focal spot sizes are offering the possibility to operate either in standard radiography or in radioscopic applications. The small size filament is also allowing applications with slight magnifications. The TSD225/4 is generally highly sufficient for the majority of standard industrial applications and is giving the advantage of still being Monopolar.

Slightly larger than a 160 tube, the housing diameter is only 124 mm which will ensure that the tube can still be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a Balteau.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSD225/4 (Small focal / Large focal)
Max. High voltagekV225
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeWater
HV ConnectorR24
Nominal powerW900 / 2500
Inherent filtrationmm1 Be
Target angle°20°
Leakage*mSv/h@1m10
Cooling flow ratel/min.5
WeightKg12
Max. Current @ kV Max.mA4 / 11,1
Focal spot (EN12543)d1 / 3
Max. CurrentmA18 / 30

* Leakage radiation max at 1m in mSv/h at nominal kV

Baltograph

TSD320/3

  • Product description
  • Works with

The TSD320/3 is a high energy tubehead able to provide high power even on small size filaments. This tube will help you gaining time and definition in medium to heavy walled applications. Equipped with two independent filaments, this tube allows you to drive up to 1,8 kW on the large filament while the small size filament will give you enough power to perform the majority of higher definition applications even at 320 kV.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
SpecificationsUnitsTSD320/3 (Small focal / Large focal)
Max. High voltagekV320
Tube typeMetal Ceramic
Beam angle°40° x 30°
Cooling modeOil
HV ConnectorR24
Nominal powerW800 / 1800
Inherent filtrationmm3 Be
Target angle°11°
Leakage*mSv/h@1m5
Cooling flow ratel/min.14
WeightKg40
Max. Current @ kV Max.mA2,5 / 5,6
Focal spot (EN12543)d0,4** / 1
Max. CurrentmA11 / 25

* Leakage radiation max at 1m in mSv/h at nominal kV

** 25% Threshold

Baltograph

TSD320/3A

  • Product description
  • Works with

The TSD320/3A is a high energy tubehead able to provide high power even on small size filaments. This tube will help you gaining time and definition in medium to heavy walled applications. Equipped with two independent filaments, this tube allows you to drive up to 1,8 kW on the large filament while the small size filament will give you enough power to perform the majority of higher definition applications even at 320 kV.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are axial R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a Balteau NDT.

  • XSD Series
SpecificationsUnitsTSD320/3A (Small focal / Large focal)
Max. High voltagekV320
Tube typeMetal Ceramic
Beam angle°40° x 30°
Cooling modeOil
HV ConnectorR24
Nominal powerW800 / 1800
Inherent filtrationmm3 Be
Target angle°11°
Leakage*mSv/h@1m5
Cooling flow ratel/min.14
WeightKg40
Max. Current @ kV Max.mA2,5 / 5,6
Focal spot (EN12543)d0,4** / 1
Max. CurrentmA11 / 25

* Leakage radiation max at 1m in mSv/h at nominal kV

** 25% Threshold

Baltograph

TSD320/5

  • Product description
  • Works with

The TSD320/5 is a tube of the Bipolar range. This tube has a big amount of power available and is designed for medium to heavy walled steel thicknesses applications. Driven by the adequate generator it can also be used in light alloys and composites materials. With a power of up to 4 kW on the large filament this tube helps you reducing your film exposures durations or achieve superior thicknesses in reduced times. The second filament will provide an alternative for higher definition radiographies or radioscopic applications.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
SpecificationsUnitsTSD320/5 (Small focal / Large focal)
Max. High voltagekV320
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeOil
HV ConnectorR24
Nominal powerW1500 / 4200
Inherent filtrationmm3 Be
Target angle°20°
Leakage*mSv/h@1m5
Cooling flow ratel/min.14
WeightKg40
Max. Current @ kV Max.mA4,5 / 13
Focal spot (EN12543)d3 / 5,5
Max. CurrentmA15 / 35

* Leakage radiation max at 1m in mSv/h at nominal kV

 

Baltograph

TSD420/0A

  • Product description
  • Works with

The TSD420/0A is introducing the series of one of the highest powerful tubes manufactured by BALTEAU. This tube doesn’t offer a compromise to power neither to flexibility but is designed for heavy walled and highly absorbing applications mainly. Two independent filaments are giving the possibility to perform inspections up to 4,5 kW on the large filament. Thanks to its beryllium window this tube also delivers soft X-rays for light materials or improved radiographic techniques.

The tube shielding is internal and reduces the radiation leakage to less than 10 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R28.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a Balteau.

  • XSD Series
SpecificationsUnitsTSD420/0A (Small focal / Large focal)
Max. High voltagekV420
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeOil
HV ConnectorR28
Nominal powerW900 / 4500
Inherent filtrationmm3 + 2 Be
Target angle°30°
Leakage*mSv/h@1m10
Cooling flow ratel/min.14
WeightKg95
Max. Current @ kV Max.mA2 / 10,7
Focal spot (EN12543)d2,5 / 5,5
Max. CurrentmA10 / 30

* Leakage radiation max at 1m in mSv/h at nominal kV

 

Baltograph

TSD450/0

  • Product description
  • Works with

The TSD450/0 is introducing the series of the highest powerful tubes manufactured by BALTEAU. This tube doesn’t offer a compromise to power neither to flexibility but is designed for heavy walled and highly absorbing applications mainly. Two independent filaments are giving the possibility to perform inspections up to 4,5 kW on the large filament. Thanks to its beryllium window this tube also delivers soft X-rays for light materials or improved radiographic techniques.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R28.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
SpecificationsUnitsTSD450/0 (Small focal / Large focal)
Max. High voltagekV450
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeOil
HV ConnectorR28
Nominal powerW900 / 4500
Inherent filtrationmm5 Be
Target angle°30°
Leakage*mSv/h@1m10
Cooling flow ratel/min.14
WeightKg95
Max. Current @ kV Max.mA2 / 10
Focal spot (EN12543)d2,5 / 5,5
Max. CurrentmA10 / 24

* Leakage radiation max at 1m in mSv/h at nominal kV

 

Baltograph

TSD450/2

  • Product description
  • Works with

The TSD450/2 is introducing the series of the highest powerful tubes manufactured by Balteau. This tube doesn’t offer a compromise to power neither to flexibility but is designed for heavy walled and highly absorbing applications mainly. Two independent filaments are giving the possibility to perform inspections up to 1,5 kW on the large filament. Thanks to its beryllium window this tube also delivers soft X-rays for light materials or improved radiographic techniques.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the two HV plug cones are R28.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a Balteau.

  • XSD Series
SpecificationsUnitsTSD450/2 (Small focal / Large focal)
Max. High voltagekV450
Tube typeMetal Ceramic
Beam angle°40° x 30°
Cooling modeOil
HV ConnectorR28
Nominal powerW700 / 1500
Inherent filtrationmm5 Be
Target angle°11°
Leakage*mSv/h@1m5
Cooling flow ratel/min.14
WeightKg95
Max. Current @ kV Max.mA1,5 / 3,3
Focal spot (EN12543)d0,4** / 1
Max. CurrentmA6 / 14

* Leakage radiation max at 1m in mSv/h at nominal kV

** 25% Threshold

Baltograph

TSD100/1

  • Product description
  • Works with

The TSD 100-1 is a universal Monopolar tube for light alloys, composites or for small to medium steel thicknesses. This light tube allows you to reach the power of 1kW. The outside diameter of the housing is smaller than 100 mm. This is the ideal solution for applications even with tiny space.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 meter as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R10.

This tube can be used with all brands of generators provided that the load curves can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSD100/1
Max. High voltagekV100
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeWater
HV ConnectorR10
Nominal powerW1000
Inherent fi ltrationmm0.8 Be
Target angle°20°
Leakage*mSv/h@1m2,5
Cooling fl ow ratel/min.4
WeightKg3,5
Max. Current @ kV Max.mA10
Focal spot (EN12543)d3.0 mm
Max. CurrentmA24

* Leakage radiation max at 1m in mSv/h at nominal kV

Baltograph

TSD160/0

  • Product description
  • Works with

The TSD160/0 is a universal Monopolar tube for light alloys, composites or small to medium steel thicknesses. Due to the combination of a large and a small focus into the same tube, the tube is ideal for all purposes applications where either power or definitions may be required. The large focus allows you to drive up to 3 kW power for applications where thicknesses are high or material is highly absorbent. The small focus will be preferred for applications with magnification of on very light material and thicknesses or with a radioscopic application.

The outside diameter of the housing is barely 100 mm which will ensure that the tube can be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSD160/0 (Small focal / Large focal)
Max. High voltagekV160
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeWater
HV ConnectorR24
Nominal powerW640 / 3000
Inherent filtrationmm0,8 Be
Target angle°20°
Leakage*mSv/h@1m2,5
Cooling flow ratel/min.4
WeightKg8
Max. Current @ kV Max.mA4 / 19
Focal spot (EN12543)d1 / 5,5
Max. CurrentmA15 / 40

* Leakage radiation max at 1m in mSv/h at nominal kV

Baltograph

TSD160/1

  • Product description
  • Works with

The TSD160/1 is a universal Monopolar tube for light alloys, composites or small steel thicknesses. This tube is a compromise between a very fine and a fine focus application and is generally selected by users whose applications are not requiring a very high dose output either because distances to detector are generally short or because materials are not thick or very dense. This tube is perfectly adapted to Radioscopy applications or low power generators (< 1,6 kW).

The outside diameter of the housing is barely 100 mm which will ensure that the tube can be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSD160/1 (Small focal / Large focal)
Max. High voltagekV160
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeWater
HV ConnectorR24
Nominal powerW640 / 1600
Inherent filtrationmm0,8 Be
Target angle°20°
Leakage*mSv/h@1m2,5
Cooling flow ratel/min.4
WeightKg8
Max. Current @ kV Max.mA4 / 10
Focal spot (EN12543)d1 / 3
Max. CurrentmA15 / 40

* Leakage radiation max at 1m in mSv/h at nominal kV

Baltograph

TSD160/3

  • Product description
  • Works with

The TSD160/3 is a Monopolar tube designed for radioscopy installations or for applications where working cycle is extremely important. Indeed, the tube is mounted with two identical small size filaments adapted to the radiography or radioscopy of light alloys, composites or small steel thicknesses. One filament can be considered as a spare of the other one and due to the fact that sizes are identical, can replace a broken filament without the need of re-qualification of the technique or a change in the parameters.

The outside diameter of the housing is barely 100 mm which will ensure that the tube can be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSD160/3
Max. High voltagekV160
Tube typeMetal Ceramic
Beam angle°40°
Cooling modeWater
HV ConnectorR24
Nominal powerW640
Inherent filtrationmm0,8 Be
Target angle°20°
Leakage*mSv/h@1m2,5
Cooling flow ratel/min.4
WeightKg8
Max. Current @ kV Max.mA4
Focal spot (EN12543)d1
Max. CurrentmA15

* Leakage radiation max at 1m in mSv/h at nominal kV

Baltograph

TSD160/5

  • Product description
  • Works with

The TSD 160/5 is a universal Monopolar tube for light alloys, composites or for small to medium steel thicknesses. Thanks to its small focal spot, this tube is convenient for applications where power and precision are required. As it is dual focal spot, the large focal spot allows you to reach until 1.8 kw which is suitable for applications where thicknesses are relatively important or for absorbing materials. The small focal spot will be adapted for applications using an optical magnification, for light material, small steel thicknesses or even for radioscopy.

The outside diameter of the housing is barely 100 mm which will ensure that the tube can be inserted even in tiny spaces. The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSD160/5 (Small focal / Large focal)
Max. High voltagekV160
Tube typeMetal Ceramic
Beam angle°40° x 30°
Cooling modeWater
HV ConnectorR24
Nominal powerW800 / 1800
Inherent filtrationmm0,8 Be
Target angle°11°
Leakage*mSv/h@1m2,5
Cooling flow ratel/min.4
WeightKg8
Max. Current @ kV Max.mA5 / 11
Focal spot (EN12543)d0,4** / 1
Max. CurrentmA20 / 40

* Leakage radiation max at 1m in mSv/h at nominal kV

** 30% Threshold

Baltograph

TSC160

  • Product description
  • Works with

The TSC160 is the Panoramic version of the Directional universal Monopolar tube for light alloys, composites or for small to medium steel thicknesses.

With a power of up to 1 kW and a diameter of 100 mm this is the ideal candidate for tank inspections or hollow components with small inner diameters.

The tube shielding is internal and reduces the radiation leakage to less than 1 R/h @ 1 m as required by International standards. In and out fluid inlets are mounted with universal connectors while the HV plug cone is a R24.

This tube can be used with all brands of generators provided that the load curve can be adapted. See our specialists if you intend to connect this tube to another unit than a BALTEAU.

  • XSD Series
  • XLD Series
  • XMD Series
  • XMLD Series
SpecificationsUnitsTSC160
Max. High voltagekV160
Tube typeMetal Ceramic
Beam angle°360° x 40°
Cooling modeWater
HV ConnectorR24
Nominal powerW1000
Inherent filtrationmm0.5 Ti + 2 H2O + 2 Al
Target angle°22°
Leakage*mSv/h@1m2,5
Cooling flow ratel/min.4
WeightKg8
Max. Current @ kV Max.mA6,2
Focal spot (EN12543)d4 x 0,4
Max. CurrentmA12

* Leakage radiation max at 1m in mSv/h at nominal kV